************************************************************************* * 20/1/2006 modified by elena vannuccini to code error flag * 10/9/2005 modified by david fedele to read buffer-data * instead raw-data-file * 29/11/2005 modified by david fedele to include crc control ************************************************************************* subroutine trkeventpkt(YODAflag,buffer,length_buffer,curpos $ ) include '../common/commontracker.f' include '../common/common_readraw.f' include '../common/level0.f' * --------------------------------------------------- * the general flag YODAflag contains information * about the integrity of the DSP packets. * * If some packets are missing or the crc check fails, * YODAflag is asserted * --------------------------------------------------- integer YODAflag logical ALARMS integer runerror !readevent error flag parameter (MAXBUFFLEN=z'172c8') integer*4 length_buffer integer*1 buffer(MAXBUFFLEN) integer curpos !current position in buffer integer startcrc integer stopcrc integer*1 crctemp * ------------------- * initializations YODAflag=1 !bad by default call initlevel0 ALARMS=.false. npkt=0 !#good DSP packets startcrc=0 stopcrc=0 crctemp=0 * ------------------- do iview=1,nviews !loop on DSPs call searchtrkheader(runerror,buffer,length_buffer,curpos, $ startcrc) if(runerror.eq.1.or.runerror.eq.-1) then * -------------------------------------------------- * no DSP packet has been found ==> go to end * -------------------------------------------------- goto 2222 !go to end endif if(checkheader.ne.2) then print*,'>>>> ERROR <<<< (trkeventpkt)' print*,'>>>> CPU packet type ',!pkt_type, $ ' does not match DSP packet type ',checkheader DAQmode_temp = ishft(iand(header(1),z'03f0'),-4) DSPnumber_temp = iand(header(1),z'000f') print*,' -----------------------------------' $ ,iview print*,' DSP number-----',int(DSPnumber_temp) print*,' DAQ mode-------',int(DAQmode_temp) print*,' -----------------------------------' goto 2525 !next view (==> search another DSP header) endif call unpackdata(runerror,buffer,length_buffer,curpos, $ startcrc,stopcrc,crctemp) if(runerror.eq.-1.or.runerror.eq.1)then goto 2222 !go to end endif npkt = npkt + 1 call fillview(iview) *-------- CRC check if(crc(iview).eq.0) then !OK *----------- ALARMS if( $ fl1(iview).ne.0.or. $ fl2(iview).ne.0.or. $ fl3(iview).ne.0.or. $ fl4(iview).ne.0.or. $ fl5(iview).ne.0.or. $ fl6(iview).ne.0.or. $ fc(iview).ne.0.or. $ DATAlength(iview).eq.0.or. $ .false.)ALARMS=.true. endif 2525 continue enddo !end loop on views 2222 continue if(npkt.eq.nviews)YODAflag=0 if(YODAflag.eq.0.and.(ALARMS.eqv..false.))good0=1 return end * ********************************************************** * * * * * * * * * * * * * * * * ********************************************************** subroutine trkcalibpkt(YODAflag,buffer,length_buffer,curpos $ ) include '../common/commontracker.f' include '../common/common_readraw.f' include '../common/trk_calib_parameters.f' * --------------------------------------------------- * the general flag YODAflag contains information * about the integrity of the DSP packets. * * If some packets are missing or the crc check fails, * YODAflag is asserted * --------------------------------------------------- integer YODAflag logical ALARMs integer runerror !readevent error flag parameter (MAXBUFFLEN=z'172c8') integer*4 length_buffer integer*1 buffer(MAXBUFFLEN) integer curpos !current position in buffer integer startcrc integer stopcrc integer*1 crctemp * ------------------- * initializations YODAflag = 1 !bad by default call initcalib ALARMS=.false. npkt=0 !#good DSP packets startcrc=0 stopcrc=0 crctemp=0 * ------------------- do iview=1,nplanes !loop on views (DSP pkt) call searchtrkheader(runerror,buffer,length_buffer,curpos, $ startcrc) if(runerror.eq.1.or.runerror.eq.-1) then goto 2222 !end loop on views (DSP pkt) endif if(checkheader.ne.3) then print*,'>>>> ERROR <<<< (trkcalibpkt)' print*,'>>>> CPU packet type ',!pkt_type, $ ' does not match DSP type ',checkheader DAQmode_temp = ishft(iand(header(1),z'03f0'),-4) DSPnumber_temp = iand(header(1),z'000f') print*,' -----------------------------------' $ ,iview print*,' DSP number-----',int(DSPnumber_temp) print*,' DAQ mode-------',int(DAQmode_temp) print*,' -----------------------------------' goto 2424 !next view (==> search another DSP header) endif call unpackcalibration(runerror,buffer,length_buffer,curpos, $ startcrc,stopcrc,crctemp) if(runerror.eq.-1.or.runerror.eq.1)then goto 2222 !end endif npkt = npkt + 1 call fillview_cal(iview) ! *--------CRC check if( crc_hcal(iview).eq.0.and. $ crc_cal(iview,1).eq.0.and. $ crc_cal(iview,2).eq.0.and. $ crc_cal(iview,3).eq.0.and. $ .true.)then *----------- ALARMS if( ncalib_event(iview).ne.0.or. $ cal_flag(iview).ne.0.or. $ .false.)ALARMS=.true. endif 2424 continue enddo ! end loop on views (calibration pkt) if(npkt.eq.nplanes)YODAflag=0 if(YODAflag.eq.0.and.(ALARMS.eqv..false.))good0=1 2222 continue return end * ********************************************************** * * * * * * * * * * * * * * * * ********************************************************** subroutine searchtrkheader(runerror,buffer,length_buffer, $ curpos,startcrc) C............................................................. C Search for a valid tracker DSP header (=>one view) C and return the type of header C............................................................. include '../common/commontracker.f' include '../common/common_readraw.f' parameter (MAXBUFFLEN=z'172c8') integer*4 length_buffer integer*1 buffer(MAXBUFFLEN) integer curpos !current position in buffer integer startcrc integer runerror !readevent error flag c-------------------------------------------------- c N.B.13 bit packing is done for each DSP header+datablock, C so each DSP 13 bit c first word starts at the beginnig of a 16 bit word c-------------------------------------------------- 9100 continue runerror=0 !error flag initialization checkheader=0 c-------------------------------------------------- c looks for a DSP header beginning C (a word beginning with 1110) c-------------------------------------------------- call findstart(runerror,buffer,length_buffer,curpos) if(runerror.eq.1) goto 200 !end if(runerror.eq.-1)goto 200 !end c-------------------------------------------------- c the first word could be a DSP header first word: C reads 13 8-bit words and c writes them in 16 13-bit words to check for all C DSP header features c-------------------------------------------------- call hunpacker(header,runerror,buffer,length_buffer,curpos, $ startcrc) if(runerror.eq.1) goto 200 !end if(runerror.eq.-1)goto 200 !end c-------------------------------------------------- c extracts and controls header: c-------------------------------------------------- C last header word must be: c |0001|1100|0000|0000| for acquisition c |0001|1111|1111|1111| for calibration c-------------------------------------------------- if(iand(header(16),z'ffff').eq.z'1c00') then checkheader=2 ! event packet elseif(iand(header(16),z'ffff').eq.z'1fff') then checkheader=3 ! calibration packet else checkheader=1 ! not a valid DSP header endif c-------------------------------------------------- c first header word must be: c |0001|110x|xxxx|xxxx| c-------------------------------------------------- if(iand(header(1),z'fe00').ne.z'1c00') $ checkheader=1 !not a valid DSP header c-------------------------------------------------- c intermediate header words must be: c |0001|010x|xxxx|xxxx| c-------------------------------------------------- do i=2,15 if(iand(header(i),z'fc00').ne.z'1400') $ checkheader=1 !not a valid DSP header enddo c-------------------------------------------------- c if checkheader = 1 c then this is not a DSP header (or some c noise lurks around) so go a word ahead and c try again c-------------------------------------------------- if(checkheader.eq.1) then curpos=curpos-(13*2)+1 !goes back 13 words, then half 16 bit word ahead goto 9100 endif 200 continue end * ********************************************************** * * * * * * * * * * * * * * * * ********************************************************** subroutine unpackcalibration(runerror,buffer,length_buffer,curpos, $ startcrc,stopcrc,crctemp) *............................................................. * decode calibration data * header + data(PED SIG BAD) + trailer *............................................................ include '../common/commontracker.f' include '../common/common_readraw.f' parameter (MAXBUFFLEN=z'172c8') integer*4 length_buffer integer*1 buffer(MAXBUFFLEN) integer curpos !current position in buffer integer startcrc integer stopcrc integer*1 crctemp integer*1 crc_trail integer runerror !readevent error flag integer*2 templ(nstrips_ladder) real*4 tempf(nstrips_ladder) 12 format(z4) *----------------------------------------------------------- * HEADER * (N.B. during test 2003 the header of calibration packets * was only partially filled) * * the following is the final calibration header *----------------------------------------------------------- DAQmode_cal = ishft(iand(header(1),z'03f0'),-4) DSPnumber_cal = iand(header(1),z'000f') dataword = ior(ishft(iand(header(2),z'03ff') $ ,10),iand(header(3),z'03ff')) calibrationnumber = iand(header(4),z'03ff') nused_event = iand(header(5),z'03ff') ped_1 = iand(header(6),z'03ff') ped_2 = iand(header(7),z'03ff') ped_3 = iand(header(8),z'03ff') ped_1 = ped_1 * 4 ped_2 = ped_2 * 4 ped_3 = ped_3 * 4 sig_1 = iand(header(9),z'03ff') sig_2 = iand(header(10),z'03ff') sig_3 = iand(header(11),z'03ff') nbad_1 = iand(header(12),z'03ff') nbad_2 = iand(header(13),z'03ff') nbad_3 = iand(header(14),z'03ff') ff = ishft(iand(header(15),z'0300'),-8) checksum_cal = iand(header(15),z'00ff') c----------------------------------------------------------- c the checksum is a 8-bit word calculated as the c XOR of the 16-bit data words, c hence the XOR between the two halfs C---------------------------------------------------------- runerror=0 c$$$ c$$$ print*,'-----------------------------------' c$$$ print*,'unpackcalibration: readtrailer --- ', c$$$* $ trailer,runerror,buffer,length_buffer,curpos, c$$$ $ startcrc,stopcrc,crctemp c$$$ print*,'-----------------------------------' call readtrailer(trailer,runerror,buffer,length_buffer,curpos, $ startcrc,stopcrc,crctemp) crc_trail=iand(trailer(3),z'00ff') c$$$ print *,'@@@@@@@@@@@@@ ',crctemp,crc_trail if (crctemp.eq.crc_trail)then crc_hcalib=0 else crc_hcalib=1 endif do il=1,3 !loop on ladders startcrc=curpos call readped(tempf,runerror,buffer,length_buffer,curpos) do is=1,nstrips_ladder iss=is+nstrips_ladder*(il-1) DSPped_o(DSPnumber_cal,iss)=tempf(is) enddo call readsig(tempf,runerror,buffer,length_buffer,curpos) do is=1,nstrips_ladder iss=is+nstrips_ladder*(il-1) DSPsig_o(DSPnumber_cal,iss)=tempf(is) enddo call readbad(templ,runerror,buffer,length_buffer,curpos) do is=1,nstrips_ladder iss=is+nstrips_ladder*(il-1) DSPbad_o(DSPnumber_cal,iss)=templ(is) enddo 11 format(i1,' ',z4) call readtrailer(trailer,runerror,buffer,length_buffer,curpos, $ startcrc,stopcrc,crctemp) crc_trail=iand(trailer(3),z'00ff') if (crctemp.eq.crc_trail)then crc_calib(il)=0 else crc_calib(il)=1 endif enddo !end loop on ladders return end * ********************************************************** * * * * * * * * * * * * * * * * ********************************************************** subroutine unpackdata(runerror,buffer,length_buffer,curpos, $ startcrc,stopcrc,crctemp) *............................................................. * decode event data * header + data + trailer *............................................................ include '../common/commontracker.f' include '../common/common_readraw.f' include '../common/level0.f' parameter (MAXBUFFLEN=z'172c8') integer*4 length_buffer integer*1 buffer(MAXBUFFLEN) integer curpos !current position in buffer integer startcrc integer stopcrc integer*1 crctemp integer*1 crcdat integer runerror !readevent error flag integer l_tra integer bid1_dat,bid2_dat,bid3_dat,bid4_dat,bid5_dat,bid6_dat $ ,bid7_dat,bid_dat_sum 12 format(z4) *----------------------------------------------------------- * HEADER *----------------------------------------------------------- DAQmode_dat = ishft(iand(header(1),z'03f0'),-4) DSPnumber_dat = iand(header(1),z'000f') C ------------------------------------------------------ c words 2 and 3 give the number of transmitted 16-bit c words ( 13 header words + data ) c NB: data are packed from 13-bit to 16-bit words, c so the stream is complited with zeros in order to have c a number of bits multiple of 16 C ------------------------------------------------------ l_tra = ior(ishft(iand(header(2),z'03ff') $ ,10),iand(header(3),z'03ff')) l_tra=l_tra-13 C ------------------------------------------------------ eventn_dat = ior(ishft(iand(header(4),z'03ff') $ ,10),iand(header(5),z'03ff')) nclust_dat = ishft(iand(header(6),z'0380'),-7) cutc_dat = ishft(iand(header(6),z'0070'),-4) cutcl_dat = iand(header(6),z'000f') addrcluster_dat(1) = iand(header(7),z'03ff') signcluster_dat(1) = iand(header(8),z'03ff') addrcluster_dat(2) = iand(header(9),z'03ff') signcluster_dat(2) = iand(header(10),z'03ff') addrcluster_dat(3) = iand(header(11),z'03ff') signcluster_dat(3) = iand(header(12),z'03ff') fc_dat = ishft(iand(header(13),z'0300'),-8) compressiontime_dat = iand(header(13),z'00ff') fl5_dat = ishft(iand(header(14),z'0300'),-8) fl4_dat = ishft(iand(header(14),z'0300'),-6) fl3_dat = ishft(iand(header(14),z'0300'),-4) fl2_dat = ishft(iand(header(14),z'0300'),-2) fl1_dat = iand(header(14),z'0300') fl6_dat = ishft(iand(header(15),z'0300'),-8) checksum_dat = iand(header(15),z'00ff') c----------------------------------------------------------- c the cheacksum is a 8-bit word calculated as the c XOR of the 16-bit data words, c hence the XOR between the two halfs C---------------------------------------------------------- runerror=0 nqualcosa=0 if(l_tra.eq.0)then goto 18 !empty buffer endif call dunpacker(l_tra,b_tra,runerror,buffer,length_buffer,curpos) if(runerror.eq.1.or.runerror.eq.-1) then goto 50 !go to end endif nqualcosa = (real(l_tra))/13*16 xx = b_tra(nqualcosa) if (xx.eq.0) nqualcosa=nqualcosa -1 18 datalength_dat= nqualcosa 11 format(i1,' ',z4) call readtrailer(trailer,runerror,buffer,length_buffer,curpos, $ startcrc,stopcrc,crctemp) *************************************************************** * TRAILER * *************************************************************** pnum_dat=ishft(iand(trailer(1),z'f000'),-12) cmdnum_dat=ishft(iand(trailer(1),z'0f00'),-8) bid1_dat=ishft(iand(trailer(1),z'00c0'),-6) bid2_dat=ishft(iand(trailer(1),z'0030'),-4) bid3_dat=ishft(iand(trailer(1),z'000c'),-2) bid4_dat=iand(trailer(1),z'0003') bid5_dat=ishft(iand(trailer(2),z'c000'),-14) bid6_dat=ishft(iand(trailer(2),z'3000'),-12) bid7_dat=ishft(iand(trailer(2),z'0c00'),-10) alarm_dat=ishft(iand(trailer(2),z'0300'),-8) aswr_dat=ior(ishft(iand(trailer(2),z'00ff'),8) $ ,ishft(iand(trailer(3),z'ff00'),-8)) crcdat=iand(trailer(3),z'00ff') c$$$ print*,'######################',crcdat,crctemp if(crcdat.eq.crctemp)then crc_dat=0 else crc_dat=1 endif bid_dat_sum = (bid1_dat + bid2_dat + bid3_dat + bid4_dat + & bid5_dat + bid6_dat + bid7_dat) bid_dat = bid_dat_sum/7 50 return end * ********************************************************** * * * * * * * * * * * * * * * * ********************************************************** subroutine initlevel0 include '../common/commontracker.f' include '../common/level0.f' good0=0 TOTDATAlength = 0 do i=1, nviews DAQmode(i) = 0 DSPnumber(i) = 0 eventn(i) = 0 nclust(i) = 0 cutc(i) = 0 cutcl(i) = 0 addrcluster(i,1) = 0 signcluster(i,1) = 0 addrcluster(i,2) = 0 signcluster(i,2) = 0 addrcluster(i,3) = 0 signcluster(i,3) = 0 fc(i) = 0 compressiontime(i) = 0 fl5(i) = 0 fl4(i) = 0 fl3(i) = 0 fl2(i) = 0 fl1(i) = 0 fl6(i) = 0 checksum(i) = 0 DATAlength(i) = 0 pnum(i)= 0 cmdnum(i)= 0 bid(i) = 1 alarm(i)= 0 aswr(i) = 0 crc(i)=0 enddo return end * ********************************************************** * * * * * * * * * * * * * * * * ********************************************************** subroutine fillview(i) c ----------------------------------------------------- c fill variables related to view i c which will be stored in the level0 nt-ple c at the end of loop on views c ---------------------------------------------------- include '../common/commontracker.f' include '../common/level0.f' include '../common/common_readraw.f' DAQmode(i) = DAQmode_dat DSPnumber(i) = DSPnumber_dat eventn(i) = eventn_dat nclust(i) = nclust_dat cutc(i) = cutc_dat cutcl(i) = cutcl_dat addrcluster(i,1) = addrcluster_dat(1) signcluster(i,1) = signcluster_dat(1) addrcluster(i,2) = addrcluster_dat(2) signcluster(i,2) = signcluster_dat(2) addrcluster(i,3) = addrcluster_dat(3) signcluster(i,3) = signcluster_dat(3) fc(i) = fc_dat compressiontime(i) = compressiontime_dat fl5(i) = fl5_dat fl4(i) = fl4_dat fl3(i) = fl3_dat fl2(i) = fl2_dat fl1(i) = fl1_dat fl6(i) = fl6_dat checksum(i) = checksum_dat DATAlength(i) = datalength_dat crc(i) = crc_dat c ----------------------------------------------------------------------- c filling TRAILER variables c ---------------------------------------------------------------------- pnum(i)= pnum_dat cmdnum(i)= cmdnum_dat bid(i) = bid_dat alarm(i)= alarm_dat aswr(i) = aswr_dat do idat=1,datalength_dat id = TOTDATAlength + idat datatracker(id) = b_tra(idat) enddo TOTDATAlength = TOTDATAlength + datalength_dat return end * ********************************************************** * * * * * * * * * * * * * * * * ********************************************************** subroutine fillview_cal(i) c ----------------------------------------------------- c fill variables related to view i c which will be stored in the calibration nt-ple c at the end of loop on views c ---------------------------------------------------- include '../common/commontracker.f' include '../common/trk_calib_parameters.f' include '../common/common_readraw.f' DAQmode(i) = DAQmode_cal DSPnumber(i) = DSPnumber_cal calibnumber(i) = calibrationnumber ncalib_event(i)= nused_event ped_l1(i) = ped_1 ped_l2(i) = ped_2 ped_l3(i) = ped_3 sig_l1(i) = sig_1 sig_l2(i) = sig_2 sig_l3(i) = sig_3 nbad_l1(i) = nbad_1 nbad_l2(i) = nbad_2 nbad_l3(i) = nbad_3 cal_flag(i) = ff do is=1,nstrips_view DSPbad_par(i,is) = DSPbad_o(DSPnumber_cal,is) DSPped_par(i,is) = DSPped_o(DSPnumber_cal,is) DSPsig_par(i,is) = DSPsig_o(DSPnumber_cal,is) enddo crc_hcal(i) = crc_hcalib crc_cal(i,1) = crc_calib(1) crc_cal(i,2) = crc_calib(2) crc_cal(i,3) = crc_calib(3) return end * ********************************************************** * * * * * * * * * * * * * * * * ********************************************************** subroutine initcalib include '../common/commontracker.f' include '../common/trk_calib_parameters.f' good0=0 do i=1,nplanes DAQmode(i) = 0 DSPnumber(i) = 0 calibnumber(i) = 0 ncalib_event(i)= 0 ped_l1(i) = 0 ped_l2(i) = 0 ped_l3(i) = 0 sig_l1(i) = 0 sig_l2(i) = 0 sig_l3(i) = 0 nbad_l1(i) = 0 nbad_l2(i) = 0 nbad_l3(i) = 0 cal_flag(i) = 0 do is=1,nstrips_view DSPbad_par(i,is) = 0 DSPped_par(i,is) = 0 DSPsig_par(i,is) = 0 enddo crc_hcal(i) = 0 crc_cal(i,1) = 0 crc_cal(i,2) = 0 crc_cal(i,3) = 0 enddo return end