Contents of /yoda/missing

#! /bin/sh
# Common stub for a few missing GNU programs while installing.

scriptversion=2003-09-02.23

# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 
#   Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.

# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

if test $# -eq 0; then
  echo 1>&2 "Try \`$0 --help' for more information"
  exit 1
fi

run=:

# In the cases where this matters, `missing' is being run in the
# srcdir already.
if test -f configure.ac; then
  configure_ac=configure.ac
else
  configure_ac=configure.in
fi

msg="missing on your system"

case "$1" in
--run)
  # Try to run requested program, and just exit if it succeeds.
  run=
  shift
  "$@" && exit 0
  # Exit code 63 means version mismatch.  This often happens
  # when the user try to use an ancient version of a tool on
  # a file that requires a minimum version.  In this case we
  # we should proceed has if the program had been absent, or
  # if --run hadn't been passed.
  if test $? = 63; then
    run=:
    msg="probably too old"
  fi
  ;;
esac

# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case "$1" in

  -h|--h|--he|--hel|--help)
    echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...

Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
error status if there is no known handling for PROGRAM.

Options:
  -h, --help      display this help and exit
  -v, --version   output version information and exit
  --run           try to run the given command, and emulate it if it fails

Supported PROGRAM values:
  aclocal      touch file \`aclocal.m4'
  autoconf     touch file \`configure'
  autoheader   touch file \`config.h.in'
  automake     touch all \`Makefile.in' files
  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
  flex         create \`lex.yy.c', if possible, from existing .c
  help2man     touch the output file
  lex          create \`lex.yy.c', if possible, from existing .c
  makeinfo     touch the output file
  tar          try tar, gnutar, gtar, then tar without non-portable flags
  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]

Send bug reports to <bug-automake@gnu.org>."
    ;;

  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
    echo "missing $scriptversion (GNU Automake)"
    ;;

  -*)
    echo 1>&2 "$0: Unknown \`$1' option"
    echo 1>&2 "Try \`$0 --help' for more information"
    exit 1
    ;;

  aclocal*)
    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
       # We have it, but it failed.
       exit 1
    fi

    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
         to install the \`Automake' and \`Perl' packages.  Grab them from
         any GNU archive site."
    touch aclocal.m4
    ;;

  autoconf)
    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
       # We have it, but it failed.
       exit 1
    fi

    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified \`${configure_ac}'.  You might want to install the
         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
         archive site."
    touch configure
    ;;

  autoheader)
    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
       # We have it, but it failed.
       exit 1
    fi

    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
         from any GNU archive site."
    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
    test -z "$files" && files="config.h"
    touch_files=
    for f in $files; do
      case "$f" in
      *:*) touch_files="$touch_files "`echo "$f" |
                                       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
      *) touch_files="$touch_files $f.in";;
      esac
    done
    touch $touch_files
    ;;

  automake*)
    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
       # We have it, but it failed.
       exit 1
    fi

    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
         You might want to install the \`Automake' and \`Perl' packages.
         Grab them from any GNU archive site."
    find . -type f -name Makefile.am -print |
           sed 's/\.am$/.in/' |
           while read f; do touch "$f"; done
    ;;

  autom4te)
    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
       # We have it, but it failed.
       exit 1
    fi

    echo 1>&2 "\
WARNING: \`$1' is needed, but is $msg.
         You might have modified some files without having the
         proper tools for further handling them.
         You can get \`$1' as part of \`Autoconf' from any GNU
         archive site."

    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
    if test -f "$file"; then
        touch $file
    else
        test -z "$file" || exec >$file
        echo "#! /bin/sh"
        echo "# Created by GNU Automake missing as a replacement of"
        echo "#  $ $@"
        echo "exit 0"
        chmod +x $file
        exit 1
    fi
    ;;

  bison|yacc)
    echo 1>&2 "\
WARNING: \`$1' $msg.  You should only need it if
         you modified a \`.y' file.  You may need the \`Bison' package
         in order for those modifications to take effect.  You can get
         \`Bison' from any GNU archive site."
    rm -f y.tab.c y.tab.h
    if [ $# -ne 1 ]; then
        eval LASTARG="\${$#}"
        case "$LASTARG" in
        *.y)
            SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
            if [ -f "$SRCFILE" ]; then
                 cp "$SRCFILE" y.tab.c
            fi
            SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
            if [ -f "$SRCFILE" ]; then
                 cp "$SRCFILE" y.tab.h
            fi
          ;;
        esac
    fi
    if [ ! -f y.tab.h ]; then
        echo >y.tab.h
    fi
    if [ ! -f y.tab.c ]; then
        echo 'main() { return 0; }' >y.tab.c
    fi
    ;;

  lex|flex)
    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified a \`.l' file.  You may need the \`Flex' package
         in order for those modifications to take effect.  You can get
         \`Flex' from any GNU archive site."
    rm -f lex.yy.c
    if [ $# -ne 1 ]; then
        eval LASTARG="\${$#}"
        case "$LASTARG" in
        *.l)
            SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
            if [ -f "$SRCFILE" ]; then
                 cp "$SRCFILE" lex.yy.c
            fi
          ;;
        esac
    fi
    if [ ! -f lex.yy.c ]; then
        echo 'main() { return 0; }' >lex.yy.c
    fi
    ;;

  help2man)
    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
       # We have it, but it failed.
       exit 1
    fi

    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified a dependency of a manual page.  You may need the
         \`Help2man' package in order for those modifications to take
         effect.  You can get \`Help2man' from any GNU archive site."

    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
    if test -z "$file"; then
        file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
    fi
    if [ -f "$file" ]; then
        touch $file
    else
        test -z "$file" || exec >$file
        echo ".ab help2man is required to generate this page"
        exit 1
    fi
    ;;

  makeinfo)
    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
       # We have makeinfo, but it failed.
       exit 1
    fi

    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified a \`.texi' or \`.texinfo' file, or any other file
         indirectly affecting the aspect of the manual.  The spurious
         call might also be the consequence of using a buggy \`make' (AIX,
         DU, IRIX).  You might want to install the \`Texinfo' package or
         the \`GNU make' package.  Grab either from any GNU archive site."
    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
    if test -z "$file"; then
      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
    fi
    touch $file
    ;;

  tar)
    shift
    if test -n "$run"; then
      echo 1>&2 "ERROR: \`tar' requires --run"
      exit 1
    fi

    # We have already tried tar in the generic part.
    # Look for gnutar/gtar before invocation to avoid ugly error
    # messages.
    if (gnutar --version > /dev/null 2>&1); then
       gnutar "$@" && exit 0
    fi
    if (gtar --version > /dev/null 2>&1); then
       gtar "$@" && exit 0
    fi
    firstarg="$1"
    if shift; then
        case "$firstarg" in
        *o*)
            firstarg=`echo "$firstarg" | sed s/o//`
            tar "$firstarg" "$@" && exit 0
            ;;
        esac
        case "$firstarg" in
        *h*)
            firstarg=`echo "$firstarg" | sed s/h//`
            tar "$firstarg" "$@" && exit 0
            ;;
        esac
    fi

    echo 1>&2 "\
WARNING: I can't seem to be able to run \`tar' with the given arguments.
         You may want to install GNU tar or Free paxutils, or check the
         command line arguments."
    exit 1
    ;;

  *)
    echo 1>&2 "\
WARNING: \`$1' is needed, and is $msg.
         You might have modified some files without having the
         proper tools for further handling them.  Check the \`README' file,
         it often tells you about the needed prerequisites for installing
         this package.  You may also peek at any GNU archive site, in case
         some other package would contain this missing \`$1' program."
    exit 1
    ;;
esac

exit 0

# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:
1	#! /bin/sh
2	# Common stub for a few missing GNU programs while installing.
3
4	scriptversion=2003-09-02.23
5
6	# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003
7	# Free Software Foundation, Inc.
8	# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
9
10	# This program is free software; you can redistribute it and/or modify
11	# it under the terms of the GNU General Public License as published by
12	# the Free Software Foundation; either version 2, or (at your option)
13	# any later version.
14
15	# This program is distributed in the hope that it will be useful,
16	# but WITHOUT ANY WARRANTY; without even the implied warranty of
17	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18	# GNU General Public License for more details.
19
20	# You should have received a copy of the GNU General Public License
21	# along with this program; if not, write to the Free Software
22	# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
23	# 02111-1307, USA.
24
25	# As a special exception to the GNU General Public License, if you
26	# distribute this file as part of a program that contains a
27	# configuration script generated by Autoconf, you may include it under
28	# the same distribution terms that you use for the rest of that program.
29
30	if test $# -eq 0; then
31	echo 1>&2 "Try \`$0 --help' for more information"
32	exit 1
33	fi
34
35	run=:
36
37	# In the cases where this matters, `missing' is being run in the
38	# srcdir already.
39	if test -f configure.ac; then
40	configure_ac=configure.ac
41	else
42	configure_ac=configure.in
43	fi
44
45	msg="missing on your system"
46
47	case "$1" in
48	--run)
49	# Try to run requested program, and just exit if it succeeds.
50	run=
51	shift
52	"$@" && exit 0
53	# Exit code 63 means version mismatch. This often happens
54	# when the user try to use an ancient version of a tool on
55	# a file that requires a minimum version. In this case we
56	# we should proceed has if the program had been absent, or
57	# if --run hadn't been passed.
58	if test $? = 63; then
59	run=:
60	msg="probably too old"
61	fi
62	;;
63	esac
64
65	# If it does not exist, or fails to run (possibly an outdated version),
66	# try to emulate it.
67	case "$1" in
68
69	-h\|--h\|--he\|--hel\|--help)
70	echo "\
71	$0 [OPTION]... PROGRAM [ARGUMENT]...
72
73	Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
74	error status if there is no known handling for PROGRAM.
75
76	Options:
77	-h, --help display this help and exit
78	-v, --version output version information and exit
79	--run try to run the given command, and emulate it if it fails
80
81	Supported PROGRAM values:
82	aclocal touch file \`aclocal.m4'
83	autoconf touch file \`configure'
84	autoheader touch file \`config.h.in'
85	automake touch all \`Makefile.in' files
86	bison create \`y.tab.[ch]', if possible, from existing .[ch]
87	flex create \`lex.yy.c', if possible, from existing .c
88	help2man touch the output file
89	lex create \`lex.yy.c', if possible, from existing .c
90	makeinfo touch the output file
91	tar try tar, gnutar, gtar, then tar without non-portable flags
92	yacc create \`y.tab.[ch]', if possible, from existing .[ch]
93
94	Send bug reports to <bug-automake@gnu.org>."
95	;;
96
97	-v\|--v\|--ve\|--ver\|--vers\|--versi\|--versio\|--version)
98	echo "missing $scriptversion (GNU Automake)"
99	;;
100
101	-*)
102	echo 1>&2 "$0: Unknown \`$1' option"
103	echo 1>&2 "Try \`$0 --help' for more information"
104	exit 1
105	;;
106
107	aclocal*)
108	if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
109	# We have it, but it failed.
110	exit 1
111	fi
112
113	echo 1>&2 "\
114	WARNING: \`$1' is $msg. You should only need it if
115	you modified \`acinclude.m4' or \`${configure_ac}'. You might want
116	to install the \`Automake' and \`Perl' packages. Grab them from
117	any GNU archive site."
118	touch aclocal.m4
119	;;
120
121	autoconf)
122	if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
123	# We have it, but it failed.
124	exit 1
125	fi
126
127	echo 1>&2 "\
128	WARNING: \`$1' is $msg. You should only need it if
129	you modified \`${configure_ac}'. You might want to install the
130	\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
131	archive site."
132	touch configure
133	;;
134
135	autoheader)
136	if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
137	# We have it, but it failed.
138	exit 1
139	fi
140
141	echo 1>&2 "\
142	WARNING: \`$1' is $msg. You should only need it if
143	you modified \`acconfig.h' or \`${configure_ac}'. You might want
144	to install the \`Autoconf' and \`GNU m4' packages. Grab them
145	from any GNU archive site."
146	files=`sed -n 's/^[ ]A[CM]_CONFIG_HEADER(\([^)]\)).*/\1/p' ${configure_ac}`
147	test -z "$files" && files="config.h"
148	touch_files=
149	for f in $files; do
150	case "$f" in
151	:) touch_files="$touch_files "`echo "$f" \|
152	sed -e 's/^[^:]://' -e 's/:.//'`;;
153	*) touch_files="$touch_files $f.in";;
154	esac
155	done
156	touch $touch_files
157	;;
158
159	automake*)
160	if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
161	# We have it, but it failed.
162	exit 1
163	fi
164
165	echo 1>&2 "\
166	WARNING: \`$1' is $msg. You should only need it if
167	you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
168	You might want to install the \`Automake' and \`Perl' packages.
169	Grab them from any GNU archive site."
170	find . -type f -name Makefile.am -print \|
171	sed 's/\.am$/.in/' \|
172	while read f; do touch "$f"; done
173	;;
174
175	autom4te)
176	if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
177	# We have it, but it failed.
178	exit 1
179	fi
180
181	echo 1>&2 "\
182	WARNING: \`$1' is needed, but is $msg.
183	You might have modified some files without having the
184	proper tools for further handling them.
185	You can get \`$1' as part of \`Autoconf' from any GNU
186	archive site."
187
188	file=`echo "$" \| sed -n 's/.--output[ =]\([^ ]\).*/\1/p'`
189	test -z "$file" && file=`echo "$" \| sed -n 's/.-o[ ]\([^ ]\).*/\1/p'`
190	if test -f "$file"; then
191	touch $file
192	else
193	test -z "$file" \|\| exec >$file
194	echo "#! /bin/sh"
195	echo "# Created by GNU Automake missing as a replacement of"
196	echo "# $ $@"
197	echo "exit 0"
198	chmod +x $file
199	exit 1
200	fi
201	;;
202
203	bison\|yacc)
204	echo 1>&2 "\
205	WARNING: \`$1' $msg. You should only need it if
206	you modified a \`.y' file. You may need the \`Bison' package
207	in order for those modifications to take effect. You can get
208	\`Bison' from any GNU archive site."
209	rm -f y.tab.c y.tab.h
210	if [ $# -ne 1 ]; then
211	eval LASTARG="\${$#}"
212	case "$LASTARG" in
213	*.y)
214	SRCFILE=`echo "$LASTARG" \| sed 's/y$/c/'`
215	if [ -f "$SRCFILE" ]; then
216	cp "$SRCFILE" y.tab.c
217	fi
218	SRCFILE=`echo "$LASTARG" \| sed 's/y$/h/'`
219	if [ -f "$SRCFILE" ]; then
220	cp "$SRCFILE" y.tab.h
221	fi
222	;;
223	esac
224	fi
225	if [ ! -f y.tab.h ]; then
226	echo >y.tab.h
227	fi
228	if [ ! -f y.tab.c ]; then
229	echo 'main() { return 0; }' >y.tab.c
230	fi
231	;;
232
233	lex\|flex)
234	echo 1>&2 "\
235	WARNING: \`$1' is $msg. You should only need it if
236	you modified a \`.l' file. You may need the \`Flex' package
237	in order for those modifications to take effect. You can get
238	\`Flex' from any GNU archive site."
239	rm -f lex.yy.c
240	if [ $# -ne 1 ]; then
241	eval LASTARG="\${$#}"
242	case "$LASTARG" in
243	*.l)
244	SRCFILE=`echo "$LASTARG" \| sed 's/l$/c/'`
245	if [ -f "$SRCFILE" ]; then
246	cp "$SRCFILE" lex.yy.c
247	fi
248	;;
249	esac
250	fi
251	if [ ! -f lex.yy.c ]; then
252	echo 'main() { return 0; }' >lex.yy.c
253	fi
254	;;
255
256	help2man)
257	if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
258	# We have it, but it failed.
259	exit 1
260	fi
261
262	echo 1>&2 "\
263	WARNING: \`$1' is $msg. You should only need it if
264	you modified a dependency of a manual page. You may need the
265	\`Help2man' package in order for those modifications to take
266	effect. You can get \`Help2man' from any GNU archive site."
267
268	file=`echo "$" \| sed -n 's/.-o \([^ ]\)./\1/p'`
269	if test -z "$file"; then
270	file=`echo "$" \| sed -n 's/.--output=\([^ ]\)./\1/p'`
271	fi
272	if [ -f "$file" ]; then
273	touch $file
274	else
275	test -z "$file" \|\| exec >$file
276	echo ".ab help2man is required to generate this page"
277	exit 1
278	fi
279	;;
280
281	makeinfo)
282	if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
283	# We have makeinfo, but it failed.
284	exit 1
285	fi
286
287	echo 1>&2 "\
288	WARNING: \`$1' is $msg. You should only need it if
289	you modified a \`.texi' or \`.texinfo' file, or any other file
290	indirectly affecting the aspect of the manual. The spurious
291	call might also be the consequence of using a buggy \`make' (AIX,
292	DU, IRIX). You might want to install the \`Texinfo' package or
293	the \`GNU make' package. Grab either from any GNU archive site."
294	file=`echo "$" \| sed -n 's/.-o \([^ ]\)./\1/p'`
295	if test -z "$file"; then
296	file=`echo "$" \| sed 's/. \([^ ]\) $/\1/'`
297	file=`sed -n '/^@setfilename/ { s/.* \([^ ]\) $/\1/; p; q; }' $file`
298	fi
299	touch $file
300	;;
301
302	tar)
303	shift
304	if test -n "$run"; then
305	echo 1>&2 "ERROR: \`tar' requires --run"
306	exit 1
307	fi
308
309	# We have already tried tar in the generic part.
310	# Look for gnutar/gtar before invocation to avoid ugly error
311	# messages.
312	if (gnutar --version > /dev/null 2>&1); then
313	gnutar "$@" && exit 0
314	fi
315	if (gtar --version > /dev/null 2>&1); then
316	gtar "$@" && exit 0
317	fi
318	firstarg="$1"
319	if shift; then
320	case "$firstarg" in
321	o)
322	firstarg=`echo "$firstarg" \| sed s/o//`
323	tar "$firstarg" "$@" && exit 0
324	;;
325	esac
326	case "$firstarg" in
327	h)
328	firstarg=`echo "$firstarg" \| sed s/h//`
329	tar "$firstarg" "$@" && exit 0
330	;;
331	esac
332	fi
333
334	echo 1>&2 "\
335	WARNING: I can't seem to be able to run \`tar' with the given arguments.
336	You may want to install GNU tar or Free paxutils, or check the
337	command line arguments."
338	exit 1
339	;;
340
341	*)
342	echo 1>&2 "\
343	WARNING: \`$1' is needed, and is $msg.
344	You might have modified some files without having the
345	proper tools for further handling them. Check the \`README' file,
346	it often tells you about the needed prerequisites for installing
347	this package. You may also peek at any GNU archive site, in case
348	some other package would contain this missing \`$1' program."
349	exit 1
350	;;
351	esac
352
353	exit 0
354
355	# Local variables:
356	# eval: (add-hook 'write-file-hooks 'time-stamp)
357	# time-stamp-start: "scriptversion="
358	# time-stamp-format: "%:y-%02m-%02d.%02H"
359	# time-stamp-end: "$"
360	# End: