Annotation of /yoda/install-sh

#!/bin/sh
#
# install - install a program, script, or datafile
#
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.  It can only install one file at a time, a restriction
# shared with many OS's install programs.


# set DOITPROG to echo to test this script

# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"


# put in absolute paths if you don't have them in your path; or use env. vars.

mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"

transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""

while [ x"$1" != x ]; do
    case $1 in
        -c) instcmd=$cpprog
            shift
            continue;;

        -d) dir_arg=true
            shift
            continue;;

        -m) chmodcmd="$chmodprog $2"
            shift
            shift
            continue;;

        -o) chowncmd="$chownprog $2"
            shift
            shift
            continue;;

        -g) chgrpcmd="$chgrpprog $2"
            shift
            shift
            continue;;

        -s) stripcmd=$stripprog
            shift
            continue;;

        -t=*) transformarg=`echo $1 | sed 's/-t=//'`
            shift
            continue;;

        -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
            shift
            continue;;

        *)  if [ x"$src" = x ]
            then
                src=$1
            else
                # this colon is to work around a 386BSD /bin/sh bug
                :
                dst=$1
            fi
            shift
            continue;;
    esac
done

if [ x"$src" = x ]
then
        echo "$0: no input file specified" >&2
        exit 1
else
        :
fi

if [ x"$dir_arg" != x ]; then
        dst=$src
        src=""

        if [ -d "$dst" ]; then
                instcmd=:
                chmodcmd=""
        else
                instcmd=$mkdirprog
        fi
else

# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.

        if [ -f "$src" ] || [ -d "$src" ]
        then
                :
        else
                echo "$0: $src does not exist" >&2
                exit 1
        fi

        if [ x"$dst" = x ]
        then
                echo "$0: no destination specified" >&2
                exit 1
        else
                :
        fi

# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic

        if [ -d "$dst" ]
        then
                dst=$dst/`basename "$src"`
        else
                :
        fi
fi

## this sed command emulates the dirname command
dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`

# Make sure that the destination directory exists.
#  this part is taken from Noah Friedman's mkinstalldirs script

# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
        '
IFS="${IFS-$defaultIFS}"

oIFS=$IFS
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS=$oIFS

pathcomp=''

while [ $# -ne 0 ] ; do
        pathcomp=$pathcomp$1
        shift

        if [ ! -d "$pathcomp" ] ;
        then
                $mkdirprog "$pathcomp"
        else
                :
        fi

        pathcomp=$pathcomp/
done
fi

if [ x"$dir_arg" != x ]
then
        $doit $instcmd "$dst" &&

        if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
        if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
        if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
        if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
else

# If we're going to rename the final executable, determine the name now.

        if [ x"$transformarg" = x ]
        then
                dstfile=`basename "$dst"`
        else
                dstfile=`basename "$dst" $transformbasename |
                        sed $transformarg`$transformbasename
        fi

# don't allow the sed command to completely eliminate the filename

        if [ x"$dstfile" = x ]
        then
                dstfile=`basename "$dst"`
        else
                :
        fi

# Make a couple of temp file names in the proper directory.

        dsttmp=$dstdir/_inst.$$_
        rmtmp=$dstdir/_rm.$$_

# Trap to clean up temp files at exit.

        trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
        trap '(exit $?); exit' 1 2 13 15

# Move or copy the file name to the temp name

        $doit $instcmd "$src" "$dsttmp" &&

# and set any options; do chmod last to preserve setuid bits

# If any of these fail, we abort the whole thing.  If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.

        if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
        if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
        if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
        if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&

# Now remove or move aside any old file at destination location.  We try this
# two ways since rm can't unlink itself on some systems and the destination
# file might be busy for other reasons.  In this case, the final cleanup
# might fail but the new file should still install successfully.

{
        if [ -f "$dstdir/$dstfile" ]
        then
                $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
                $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
                {
                  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
                  (exit 1); exit
                }
        else
                :
        fi
} &&

# Now rename the file to the real destination.

        $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"

fi &&

# The final little trick to "correctly" pass the exit status to the exit trap.

{
        (exit 0); exit
}
1	kusanagi	1.1	#!/bin/sh
2	kusanagi	1.2	#
3	kusanagi	1.1	# install - install a program, script, or datafile
4			#
5	kusanagi	2.1	# This originates from X11R5 (mit/util/scripts/install.sh), which was
6			# later released in X11R6 (xc/config/util/install.sh) with the
7			# following copyright and license.
8	kusanagi	1.1	#
9	kusanagi	2.1	# Copyright (C) 1994 X Consortium
10			#
11			# Permission is hereby granted, free of charge, to any person obtaining a copy
12			# of this software and associated documentation files (the "Software"), to
13			# deal in the Software without restriction, including without limitation the
14			# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
15			# sell copies of the Software, and to permit persons to whom the Software is
16			# furnished to do so, subject to the following conditions:
17			#
18			# The above copyright notice and this permission notice shall be included in
19			# all copies or substantial portions of the Software.
20			#
21			# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
22			# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
23			# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
24			# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
25			# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
26			# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
27			#
28			# Except as contained in this notice, the name of the X Consortium shall not
29			# be used in advertising or otherwise to promote the sale, use or other deal-
30			# ings in this Software without prior written authorization from the X Consor-
31			# tium.
32			#
33			#
34			# FSF changes to this file are in the public domain.
35	kusanagi	1.1	#
36			# Calling this script install-sh is preferred over install.sh, to prevent
37			# `make' implicit rules from creating a file called install from it
38			# when there is no Makefile.
39			#
40			# This script is compatible with the BSD install script, but was written
41			# from scratch. It can only install one file at a time, a restriction
42			# shared with many OS's install programs.
43
44	kusanagi	1.2
45	kusanagi	1.1	# set DOITPROG to echo to test this script
46
47			# Don't use :- since 4.3BSD and earlier shells don't like it.
48			doit="${DOITPROG-}"
49
50	kusanagi	1.2
51	kusanagi	1.1	# put in absolute paths if you don't have them in your path; or use env. vars.
52
53			mvprog="${MVPROG-mv}"
54			cpprog="${CPPROG-cp}"
55			chmodprog="${CHMODPROG-chmod}"
56			chownprog="${CHOWNPROG-chown}"
57			chgrpprog="${CHGRPPROG-chgrp}"
58			stripprog="${STRIPPROG-strip}"
59			rmprog="${RMPROG-rm}"
60			mkdirprog="${MKDIRPROG-mkdir}"
61
62	kusanagi	1.2	transformbasename=""
63			transform_arg=""
64	kusanagi	1.1	instcmd="$mvprog"
65			chmodcmd="$chmodprog 0755"
66	kusanagi	1.2	chowncmd=""
67			chgrpcmd=""
68			stripcmd=""
69	kusanagi	1.1	rmcmd="$rmprog -f"
70			mvcmd="$mvprog"
71	kusanagi	1.2	src=""
72			dst=""
73			dir_arg=""
74
75			while [ x"$1" != x ]; do
76			case $1 in
77	kusanagi	2.1	-c) instcmd=$cpprog
78	kusanagi	1.2	shift
79			continue;;
80
81			-d) dir_arg=true
82			shift
83			continue;;
84
85			-m) chmodcmd="$chmodprog $2"
86			shift
87			shift
88			continue;;
89
90			-o) chowncmd="$chownprog $2"
91			shift
92			shift
93			continue;;
94
95			-g) chgrpcmd="$chgrpprog $2"
96			shift
97			shift
98			continue;;
99
100	kusanagi	2.1	-s) stripcmd=$stripprog
101	kusanagi	1.2	shift
102			continue;;
103
104			-t=*) transformarg=`echo $1 \| sed 's/-t=//'`
105			shift
106			continue;;
107
108			-b=*) transformbasename=`echo $1 \| sed 's/-b=//'`
109			shift
110			continue;;
111
112			*) if [ x"$src" = x ]
113			then
114			src=$1
115			else
116			# this colon is to work around a 386BSD /bin/sh bug
117			:
118			dst=$1
119			fi
120			shift
121			continue;;
122			esac
123	kusanagi	1.1	done
124
125	kusanagi	1.2	if [ x"$src" = x ]
126			then
127	kusanagi	2.1	echo "$0: no input file specified" >&2
128	kusanagi	1.2	exit 1
129			else
130	kusanagi	2.1	:
131	kusanagi	1.1	fi
132
133	kusanagi	1.2	if [ x"$dir_arg" != x ]; then
134			dst=$src
135			src=""
136	kusanagi	2.1
137			if [ -d "$dst" ]; then
138	kusanagi	1.2	instcmd=:
139			chmodcmd=""
140			else
141	kusanagi	2.1	instcmd=$mkdirprog
142	kusanagi	1.2	fi
143			else
144
145			# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
146	kusanagi	2.1	# might cause directories to be created, which would be especially bad
147	kusanagi	1.2	# if $src (and thus $dsttmp) contains '*'.
148
149	kusanagi	2.1	if [ -f "$src" ] \|\| [ -d "$src" ]
150	kusanagi	1.2	then
151	kusanagi	2.1	:
152	kusanagi	1.2	else
153	kusanagi	2.1	echo "$0: $src does not exist" >&2
154	kusanagi	1.2	exit 1
155			fi
156	kusanagi	2.1
157	kusanagi	1.2	if [ x"$dst" = x ]
158			then
159	kusanagi	2.1	echo "$0: no destination specified" >&2
160	kusanagi	1.2	exit 1
161			else
162	kusanagi	2.1	:
163	kusanagi	1.2	fi
164
165			# If destination is a directory, append the input filename; if your system
166			# does not like double slashes in filenames, you may need to add some logic
167
168	kusanagi	2.1	if [ -d "$dst" ]
169	kusanagi	1.2	then
170	kusanagi	2.1	dst=$dst/`basename "$src"`
171	kusanagi	1.2	else
172	kusanagi	2.1	:
173	kusanagi	1.2	fi
174			fi
175
176			## this sed command emulates the dirname command
177	kusanagi	2.1	dstdir=`echo "$dst" \| sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
178	kusanagi	1.2
179			# Make sure that the destination directory exists.
180			# this part is taken from Noah Friedman's mkinstalldirs script
181
182			# Skip lots of stat calls in the usual case.
183			if [ ! -d "$dstdir" ]; then
184	kusanagi	2.1	defaultIFS='
185			'
186			IFS="${IFS-$defaultIFS}"
187	kusanagi	1.2
188	kusanagi	2.1	oIFS=$IFS
189	kusanagi	1.2	# Some sh's can't handle IFS=/ for some reason.
190			IFS='%'
191	kusanagi	2.1	set - `echo "$dstdir" \| sed -e 's@/@%@g' -e 's@^%@/@'`
192			IFS=$oIFS
193	kusanagi	1.2
194			pathcomp=''
195
196			while [ $# -ne 0 ] ; do
197	kusanagi	2.1	pathcomp=$pathcomp$1
198	kusanagi	1.2	shift
199
200	kusanagi	2.1	if [ ! -d "$pathcomp" ] ;
201	kusanagi	1.2	then
202	kusanagi	2.1	$mkdirprog "$pathcomp"
203	kusanagi	1.2	else
204	kusanagi	2.1	:
205	kusanagi	1.2	fi
206	kusanagi	1.1
207	kusanagi	2.1	pathcomp=$pathcomp/
208	kusanagi	1.1	done
209	kusanagi	1.2	fi
210
211			if [ x"$dir_arg" != x ]
212			then
213	kusanagi	2.1	$doit $instcmd "$dst" &&
214	kusanagi	1.2
215	kusanagi	2.1	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
216			if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
217			if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
218			if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
219	kusanagi	1.2	else
220
221			# If we're going to rename the final executable, determine the name now.
222
223	kusanagi	2.1	if [ x"$transformarg" = x ]
224	kusanagi	1.2	then
225	kusanagi	2.1	dstfile=`basename "$dst"`
226	kusanagi	1.2	else
227	kusanagi	2.1	dstfile=`basename "$dst" $transformbasename \|
228	kusanagi	1.2	sed $transformarg`$transformbasename
229			fi
230
231			# don't allow the sed command to completely eliminate the filename
232
233	kusanagi	2.1	if [ x"$dstfile" = x ]
234	kusanagi	1.2	then
235	kusanagi	2.1	dstfile=`basename "$dst"`
236	kusanagi	1.2	else
237	kusanagi	2.1	:
238	kusanagi	1.2	fi
239
240	kusanagi	2.1	# Make a couple of temp file names in the proper directory.
241
242			dsttmp=$dstdir/_inst.$$_
243			rmtmp=$dstdir/_rm.$$_
244	kusanagi	1.2
245	kusanagi	2.1	# Trap to clean up temp files at exit.
246
247			trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
248			trap '(exit $?); exit' 1 2 13 15
249	kusanagi	1.2
250			# Move or copy the file name to the temp name
251
252	kusanagi	2.1	$doit $instcmd "$src" "$dsttmp" &&
253	kusanagi	1.2
254			# and set any options; do chmod last to preserve setuid bits
255
256			# If any of these fail, we abort the whole thing. If we want to
257			# ignore errors from any of these, just make sure not to ignore
258			# errors from the above "$doit $instcmd $src $dsttmp" command.
259
260	kusanagi	2.1	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
261			if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
262			if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
263			if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
264
265			# Now remove or move aside any old file at destination location. We try this
266			# two ways since rm can't unlink itself on some systems and the destination
267			# file might be busy for other reasons. In this case, the final cleanup
268			# might fail but the new file should still install successfully.
269
270			{
271			if [ -f "$dstdir/$dstfile" ]
272			then
273			$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \|\|
274			$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \|\|
275			{
276			echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
277			(exit 1); exit
278			}
279			else
280			:
281			fi
282			} &&
283	kusanagi	1.2
284			# Now rename the file to the real destination.
285
286	kusanagi	2.1	$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
287	kusanagi	1.2
288			fi &&
289
290	kusanagi	2.1	# The final little trick to "correctly" pass the exit status to the exit trap.
291	kusanagi	1.1
292	kusanagi	2.1	{
293			(exit 0); exit
294			}