yoda/event/RunHeaderEvent.h

#ifndef RUNHEADER_EVENT_H
#define RUNHEADER_EVENT_H

#include "SubPacket.h"

namespace pamela {
    /**
    * RunHeaderEvent data Wrapper.
    * The RunHeaderEvent represent a RunHeader packet generated by the PAMELA CPU software.
    * One RunHeader packet is expected before each Run session.
    */
  class RunHeaderEvent: public pamela::SubPacket {
  private:
   
  public:
    RunHeaderEvent(void);
    
    /**
     * The Compilation Timestamp of the PAMELA CPU software.
     */
    UINT32  COMPILATIONTIMESTAMP;

    /**
     * The Acquisition setting mode for the to-be-started run.
     */
    UINT8   RM_ACQ_SETTING_MODE;

    /**
     * The last On-Board-Time on which has been received the LAST_TIME_SYNC_INFO.
     * This parameter is the copy of On-Board-Time received in the last Timesync MCMD.
     * If zero means TimeSync mcmd nerver come.
     */
    UINT32  OBT_TIME_SYNC;

    /**
     * The last received TimeSync.
     * This parameter is the copy of TimeSync received in the last Timesync MCMD.
     * If zero means TimeSync mcmd nerver come.
     */
    UINT32  LAST_TIME_SYNC_INFO;

    /**
     * The Favourite Working Schedule.
     * Description:               <BR>
     */
    UINT8   FAVOURITE_WORKING_SCHEDULE;

    /**
     * The Effective Working Schedule.
     */
    UINT8   EFFECTIVE_WORKING_SCHEDULE;

    /**
     * The Acquisition mode for the trigger mode in A mode.
     * See: sec:Trigger-acquisition-modes.
     */
    UINT32  PRH_VAR_TRIGGER_MODE_A;

    /**
     * The Acquisition mode for the trigger mode in B mode.
     * See sub:working-schedule-3
     */
    UINT32  PRH_VAR_TRIGGER_MODE_B;

    /**
     * This flag Define if this is the first run after a calibration.
     * Description:               <BR>
     * 0: is NOT the first run.   <BR>
     * 1: is the first run.       <BR>
     */
    UINT8   RM_ACQ_AFTER_CALIB;

    /**
     * This flag Define if this is the first run after a calibration.
     * See sub:trk_calib_used.
     */
    UINT32  TRK_CALIB_USED;

    /**
     * Provide information about what FEs commands are assembled inside the acquisition command queue for this run.
     * It is a bitmask whose mean is defined by the constants defined in CM_ACQBI (see sub:RM_ACQBI). 
     * In case of TRIGGER_II mode, it does count, see sec:Trigger-II-Level. <br>
     * Each bit says wheather a certain part of the command queue had been 
     * build into the command aquisition queue.
     * Bit in LSB corresponds  to low-numerical values of the following enum C-type <br>
     * RM_ACQBI_TOF_PLAN_1 is bit (1<<0) <br>
     * RM_ACQBI_TOF_PLAN_2 is bit (1<<1) <br>
     * etc...
     * Note that RM_ACQBI_XXX_BASE and   RM_ACQBI_XXX_1 is the same bit.
     * MSB not used are spere (zeroed)  <br>
     *   typedef enum {                 <br>
     *     RM_ACQBI_TOF_PLAN_1,         <br>
     *     RM_ACQBI_TOF_PLAN_2,         <br>
     *     RM_ACQBI_TOF_PLAN_3,         <br>
     *     RM_ACQBI_TOF_PLAN_4,         <br>
     *     RM_ACQBI_TOF_PLAN_5,         <br>
     *     RM_ACQBI_TOF_PLAN_6,         <br>
     *     RM_ACQBI_AC_1,               <br>
     *     RM_ACQBI_AC_2,               <br>
     *     RM_ACQBI_CAL_BASE,           <br>
     *     RM_ACQBI_CAL_1=RM_ACQBI_CAL_BASE,    <br>
     *     RM_ACQBI_CAL_2,              <br>
     *     RM_ACQBI_CAL_3,              <br>
     *     RM_ACQBI_CAL_4,              <br>
     *     RM_ACQBI_TRK_BASE,           <br>
     *     RM_ACQBI_TRK_1_1=RM_ACQBI_TRK_BASE,  <br>
     *     RM_ACQBI_TRK_1_2,    <br>
     *     RM_ACQBI_TRK_1_3,    <br>
     *     RM_ACQBI_TRK_1_4,    <br>
     *     RM_ACQBI_TRK_1_5,    <br>
     *     RM_ACQBI_TRK_1_6,    <br>
     *     RM_ACQBI_TRK_2_1,    <br>
     *     RM_ACQBI_TRK_2_2,    <br>
     *     RM_ACQBI_TRK_2_3,    <br>
     *     RM_ACQBI_TRK_2_4,    <br>
     *     RM_ACQBI_TRK_2_5,    <br>
     *     RM_ACQBI_TRK_2_6,    <br>
     *     RM_ACQBI_S4,         <br>
     *     RM_ACQBI_ND,         <br>
     *   } RM_ACQBI;            
     */
    UINT32  ACQ_BUILD_INFO;

    /**
     * Provide informations about some variable value in the starting of the acquisition procedure.
     * See sub:trk_calib_used
     *  (PRH_VAR_TOF_OK     ? 1<<0  : 0 ) |
     *  (PRH_VAR_AC_1_OK    ? 1<<1  : 0 ) |
     *  (PRH_VAR_AC_2_OK    ? 1<<2  : 0 ) |
     *  (PRH_VAR_CAL_OK     ? 1<<3  : 0 ) |
     *  (PRH_VAR_TRK_OK     ? 1<<4  : 0 ) |
     *  (PRH_VAR_S4_OK      ? 1<<5  : 0 ) |
     *  (PRH_VAR_S4_WORKING ? 1<<6  : 0 ) |
     *  (PRH_VAR_S4_ATTEMPT ? 1<<7  : 0 ) |
     *  (PRH_VAR_ND_OK      ? 1<<8  : 0 ) |
     *  (RM_use_nd          ? 1<<9  : 0 ) |
     *  (PRH_VAR_ND_ATTEMPT ? 1<<10 : 0 );
     */
    UINT16  ACQ_VAR_INFO;

    /**
     * Provide informations about the calorimter DSP Mask.
     * See sub:trk_calib_used
     */
    UINT8   CAL_DSP_MASK;
    ClassDef(RunHeaderEvent, 3)
  };
}

#endif /* RUNHEADER_EVENT_H */

1	#ifndef RUNHEADER_EVENT_H
2	#define RUNHEADER_EVENT_H
3
4	#include "SubPacket.h"
5
6	namespace pamela {
7	/**
8	* RunHeaderEvent data Wrapper.
9	* The RunHeaderEvent represent a RunHeader packet generated by the PAMELA CPU software.
10	* One RunHeader packet is expected before each Run session.
11	*/
12	class RunHeaderEvent: public pamela::SubPacket {
13	private:
14
15	public:
16	RunHeaderEvent(void);
17
18	/**
19	* The Compilation Timestamp of the PAMELA CPU software.
20	*/
21	UINT32 COMPILATIONTIMESTAMP;
22
23	/**
24	* The Acquisition setting mode for the to-be-started run.
25	*/
26	UINT8 RM_ACQ_SETTING_MODE;
27
28	/**
29	* The last On-Board-Time on which has been received the LAST_TIME_SYNC_INFO.
30	* This parameter is the copy of On-Board-Time received in the last Timesync MCMD.
31	* If zero means TimeSync mcmd nerver come.
32	*/
33	UINT32 OBT_TIME_SYNC;
34
35	/**
36	* The last received TimeSync.
37	* This parameter is the copy of TimeSync received in the last Timesync MCMD.
38	* If zero means TimeSync mcmd nerver come.
39	*/
40	UINT32 LAST_TIME_SYNC_INFO;
41
42	/**
43	* The Favourite Working Schedule.
44	* Description: <BR>
45	*/
46	UINT8 FAVOURITE_WORKING_SCHEDULE;
47
48	/**
49	* The Effective Working Schedule.
50	*/
51	UINT8 EFFECTIVE_WORKING_SCHEDULE;
52
53	/**
54	* The Acquisition mode for the trigger mode in A mode.
55	* See: sec:Trigger-acquisition-modes.
56	*/
57	UINT32 PRH_VAR_TRIGGER_MODE_A;
58
59	/**
60	* The Acquisition mode for the trigger mode in B mode.
61	* See sub:working-schedule-3
62	*/
63	UINT32 PRH_VAR_TRIGGER_MODE_B;
64
65	/**
66	* This flag Define if this is the first run after a calibration.
67	* Description: <BR>
68	* 0: is NOT the first run. <BR>
69	* 1: is the first run. <BR>
70	*/
71	UINT8 RM_ACQ_AFTER_CALIB;
72
73	/**
74	* This flag Define if this is the first run after a calibration.
75	* See sub:trk_calib_used.
76	*/
77	UINT32 TRK_CALIB_USED;
78
79	/**
80	* Provide information about what FEs commands are assembled inside the acquisition command queue for this run.
81	* It is a bitmask whose mean is defined by the constants defined in CM_ACQBI (see sub:RM_ACQBI).
82	* In case of TRIGGER_II mode, it does count, see sec:Trigger-II-Level. <br>
83	* Each bit says wheather a certain part of the command queue had been
84	* build into the command aquisition queue.
85	* Bit in LSB corresponds to low-numerical values of the following enum C-type <br>
86	* RM_ACQBI_TOF_PLAN_1 is bit (1<<0) <br>
87	* RM_ACQBI_TOF_PLAN_2 is bit (1<<1) <br>
88	* etc...
89	* Note that RM_ACQBI_XXX_BASE and RM_ACQBI_XXX_1 is the same bit.
90	* MSB not used are spere (zeroed) <br>
91	* typedef enum { <br>
92	* RM_ACQBI_TOF_PLAN_1, <br>
93	* RM_ACQBI_TOF_PLAN_2, <br>
94	* RM_ACQBI_TOF_PLAN_3, <br>
95	* RM_ACQBI_TOF_PLAN_4, <br>
96	* RM_ACQBI_TOF_PLAN_5, <br>
97	* RM_ACQBI_TOF_PLAN_6, <br>
98	* RM_ACQBI_AC_1, <br>
99	* RM_ACQBI_AC_2, <br>
100	* RM_ACQBI_CAL_BASE, <br>
101	* RM_ACQBI_CAL_1=RM_ACQBI_CAL_BASE, <br>
102	* RM_ACQBI_CAL_2, <br>
103	* RM_ACQBI_CAL_3, <br>
104	* RM_ACQBI_CAL_4, <br>
105	* RM_ACQBI_TRK_BASE, <br>
106	* RM_ACQBI_TRK_1_1=RM_ACQBI_TRK_BASE, <br>
107	* RM_ACQBI_TRK_1_2, <br>
108	* RM_ACQBI_TRK_1_3, <br>
109	* RM_ACQBI_TRK_1_4, <br>
110	* RM_ACQBI_TRK_1_5, <br>
111	* RM_ACQBI_TRK_1_6, <br>
112	* RM_ACQBI_TRK_2_1, <br>
113	* RM_ACQBI_TRK_2_2, <br>
114	* RM_ACQBI_TRK_2_3, <br>
115	* RM_ACQBI_TRK_2_4, <br>
116	* RM_ACQBI_TRK_2_5, <br>
117	* RM_ACQBI_TRK_2_6, <br>
118	* RM_ACQBI_S4, <br>
119	* RM_ACQBI_ND, <br>
120	* } RM_ACQBI;
121	*/
122	UINT32 ACQ_BUILD_INFO;
123
124	/**
125	* Provide informations about some variable value in the starting of the acquisition procedure.
126	* See sub:trk_calib_used
127	* (PRH_VAR_TOF_OK ? 1<<0 : 0 ) \|
128	* (PRH_VAR_AC_1_OK ? 1<<1 : 0 ) \|
129	* (PRH_VAR_AC_2_OK ? 1<<2 : 0 ) \|
130	* (PRH_VAR_CAL_OK ? 1<<3 : 0 ) \|
131	* (PRH_VAR_TRK_OK ? 1<<4 : 0 ) \|
132	* (PRH_VAR_S4_OK ? 1<<5 : 0 ) \|
133	* (PRH_VAR_S4_WORKING ? 1<<6 : 0 ) \|
134	* (PRH_VAR_S4_ATTEMPT ? 1<<7 : 0 ) \|
135	* (PRH_VAR_ND_OK ? 1<<8 : 0 ) \|
136	* (RM_use_nd ? 1<<9 : 0 ) \|
137	* (PRH_VAR_ND_ATTEMPT ? 1<<10 : 0 );
138	*/
139	UINT16 ACQ_VAR_INFO;
140
141	/**
142	* Provide informations about the calorimter DSP Mask.
143	* See sub:trk_calib_used
144	*/
145	UINT8 CAL_DSP_MASK;
146	ClassDef(RunHeaderEvent, 3)
147	};
148	}
149
150	#endif /* RUNHEADER_EVENT_H */
151