--- yoda/event/CalibCalPedEvent.h	2005/01/13 14:43:21	2.2
+++ yoda/event/CalibCalPedEvent.h	2005/05/28 08:03:39	4.2
@@ -5,7 +5,12 @@
 
 namespace pamela {
   /**
-   * Information events about the CalibCalPed.
+   * CalibCalPed data Wrapper.
+   *
+   * The pamela::CalibCalPed packet is the answer to a calibration session of the Tracker.
+   * It is the result of the mean over ~1000 events without particles (how this is done, is out of the 
+   * scope of the document, but mostly should be executed at an high rate while PAMELA is passing over 
+   * the Earth Equator). 
    */
   class CalibCalPedEvent: public pamela::SubPacket {
   private:
@@ -13,19 +18,65 @@
   public:
     CalibCalPedEvent(void);
 
+    /**
+     * A Counter.
+     */   
     int   iev;
+
+    /**
+     * The Status Word of each section.
+     */   
     int   cstwerr[4];
+
+    /**
+     * The Error Code for each section.
+     */   
     float cperror[4];
+
+    /**
+     * The pedestal value (ADC) for each strip in the calorimeter.
+     * The array represent the 4 sections x 11 layers x 96 strips composing the calorimeter.
+     */   
     float calped[4][11][96];
+
+    /**
+     * Define if the strip is used or not in the baseline calculation.
+     * The array represent the 4 sections x 11 layers x 96 strips composing the calorimeter.
+     * Description:                  <BR>
+     * 0x00: The strip was used.     <BR>
+     * 0xFF: The strip was NOT used. <BR>
+     */       
     float calgood[4][11][96];
+
+    /**
+     * The hardware ADC thresholds for the preamplifiers.
+     * The array represent the 4 sections x 11 layers x 6 amplifiers composing the calorimeter.
+     */   
     float calthr[4][11][6];
+
+    /**
+     * The pedestal RMS value for each strip in the calorimeter.
+     * The array represent the 4 sections x 11 layers x 96 strips composing the calorimeter.
+     */   
     float calrms[4][11][96];
+
+    /**
+     * The hardware ADC baseline for the preamplifiers.
+     * The array represent the 4 sections x 11 layers x 6 amplifiers composing the calorimeter.
+     */
     float calbase[4][11][6];
+
+    /**
+     * The variance of the baselines for the preamplifiers.
+     * The array represent the 4 sections x 11 layers x 6 amplifiers composing the calorimeter.
+     */
     float calvar[4][11][6];
-    float calpuls[4][11][96];
+
+
+    //float calpuls[4][11][96];
     UINT8 unpackError;
 
-    ClassDef(CalibCalPedEvent, 1)
+    ClassDef(CalibCalPedEvent, 2)
   };
 }