yoda/event/CalibCalPedEvent.h

#ifndef CALIBCALPED_EVENT_H
#define CALIBCALPED_EVENT_H

#include "SubPacket.h"

namespace pamela {
  /**
   * CalibCalPed data Wrapper.
   *
   * The pamela::CalibCalPed packet is the answer to a calibration session of the Tracker.
   * It is the result of the mean over ~1000 events without particles (how this is done, is out of the 
   * scope of the document, but mostly should be executed at an high rate while PAMELA is passing over 
   * the Earth Equator). 
   */
  class CalibCalPedEvent: public pamela::SubPacket {
  private:
   
  public:
    CalibCalPedEvent(void);

    /**
     * A Counter.
     */   
    int   iev;

    /**
     * The Status Word of each section.
     */   
    int   cstwerr[4];

    /**
     * The Error Code for each section.
     */   
    float cperror[4];

    /**
     * The pedestal value (ADC) for each strip in the calorimeter.
     * The array represent the 4 sections x 11 layers x 96 strips composing the calorimeter.
     */   
    float calped[4][11][96];

    /**
     * Define if the strip is used or not in the baseline calculation.
     * The array represent the 4 sections x 11 layers x 96 strips composing the calorimeter.
     * Description:                  <BR>
     * 0x00: The strip was used.     <BR>
     * 0xFF: The strip was NOT used. <BR>
     */       
    float calgood[4][11][96];

    /**
     * The hardware ADC thresholds for the preamplifiers.
     * The array represent the 4 sections x 11 layers x 6 amplifiers composing the calorimeter.
     */   
    float calthr[4][11][6];

    /**
     * The pedestal RMS value for each strip in the calorimeter.
     * The array represent the 4 sections x 11 layers x 96 strips composing the calorimeter.
     */   
    float calrms[4][11][96];

    /**
     * The hardware ADC baseline for the preamplifiers.
     * The array represent the 4 sections x 11 layers x 6 amplifiers composing the calorimeter.
     */
    float calbase[4][11][6];

    /**
     * The variance of the baselines for the preamplifiers.
     * The array represent the 4 sections x 11 layers x 6 amplifiers composing the calorimeter.
     */
    float calvar[4][11][6];


    float calpuls[4][11][96];
    UINT8 unpackError;

    ClassDef(CalibCalPedEvent, 2)
  };
}

#endif /* CALIBCALPED_EVENT_H */

1	kusanagi	1.1	#ifndef CALIBCALPED_EVENT_H
2			#define CALIBCALPED_EVENT_H
3
4			#include "SubPacket.h"
5
6			namespace pamela {
7			/**
8	kusanagi	4.1	* CalibCalPed data Wrapper.
9			*
10			* The pamela::CalibCalPed packet is the answer to a calibration session of the Tracker.
11			* It is the result of the mean over ~1000 events without particles (how this is done, is out of the
12			* scope of the document, but mostly should be executed at an high rate while PAMELA is passing over
13			* the Earth Equator).
14	kusanagi	1.1	*/
15			class CalibCalPedEvent: public pamela::SubPacket {
16			private:
17
18			public:
19			CalibCalPedEvent(void);
20
21	kusanagi	4.1	/**
22			* A Counter.
23			*/
24	kusanagi	2.1	int iev;
25	kusanagi	4.1
26			/**
27			* The Status Word of each section.
28			*/
29	kusanagi	2.1	int cstwerr[4];
30	kusanagi	4.1
31			/**
32			* The Error Code for each section.
33			*/
34	kusanagi	2.1	float cperror[4];
35	kusanagi	4.1
36			/**
37			* The pedestal value (ADC) for each strip in the calorimeter.
38			* The array represent the 4 sections x 11 layers x 96 strips composing the calorimeter.
39			*/
40	kusanagi	2.1	float calped[4][11][96];
41	kusanagi	4.1
42			/**
43			* Define if the strip is used or not in the baseline calculation.
44			* The array represent the 4 sections x 11 layers x 96 strips composing the calorimeter.
45			* Description: <BR>
46			* 0x00: The strip was used. <BR>
47			* 0xFF: The strip was NOT used. <BR>
48			*/
49	kusanagi	2.1	float calgood[4][11][96];
50	kusanagi	4.1
51			/**
52			* The hardware ADC thresholds for the preamplifiers.
53			* The array represent the 4 sections x 11 layers x 6 amplifiers composing the calorimeter.
54			*/
55	kusanagi	2.1	float calthr[4][11][6];
56	kusanagi	4.1
57			/**
58			* The pedestal RMS value for each strip in the calorimeter.
59			* The array represent the 4 sections x 11 layers x 96 strips composing the calorimeter.
60			*/
61	kusanagi	2.1	float calrms[4][11][96];
62	kusanagi	4.1
63			/**
64			* The hardware ADC baseline for the preamplifiers.
65			* The array represent the 4 sections x 11 layers x 6 amplifiers composing the calorimeter.
66			*/
67	kusanagi	2.1	float calbase[4][11][6];
68	kusanagi	4.1
69			/**
70			* The variance of the baselines for the preamplifiers.
71			* The array represent the 4 sections x 11 layers x 6 amplifiers composing the calorimeter.
72			*/
73	kusanagi	2.1	float calvar[4][11][6];
74	kusanagi	4.1
75
76	kusanagi	2.1	float calpuls[4][11][96];
77	kusanagi	2.2	UINT8 unpackError;
78	kusanagi	1.2
79	kusanagi	2.3	ClassDef(CalibCalPedEvent, 2)
80	kusanagi	1.1	};
81			}
82
83			#endif /* CALIBCALPED_EVENT_H */
84