--- gpamela/history/v_100.txt	2006/05/11 23:53:15	3.11
+++ gpamela/history/v_100.txt	2006/06/30 15:38:16	3.14
@@ -1,8 +1,16 @@
-
 #
-# $Id: v_100.txt,v 3.10 2006/04/10 11:07:43 cafagna Exp $
+# $Id: v_100.txt,v 3.13 2006/06/05 13:56:17 pamela Exp $
 #
 # $Log: v_100.txt,v $
+# Revision 3.13  2006/06/05 13:56:17  pamela
+# Gigantic resonance added for gamma enetering in the calorimeter absorber
+#
+# Revision 3.12  2006/05/18 10:52:32  pam-ba
+# TOF geometry completed and a new material, the polystyrene (density 35 g/l), added
+#
+# Revision 3.11  2006/05/11 23:53:15  cafagna
+# More bugs fixed in the CALO ntple structure filling
+#
 # Revision 3.10  2006/04/10 11:07:43  cafagna
 # GEN data card updated, ZDGEN added
 #
@@ -47,6 +55,32 @@
 #CMZ :  1.00/01 28/11/95  18.51.23  by  Francesco Cafagna
 #-- Author :    Francesco Cafagna   28/11/95 
 
+June 2006, Bari
+
+The center of the scintillator planes S22Y (variable ZPAMS22Y in gpdgeo.inc)
+and S12X (variable ZPAMS12X in gpdgeo.inc) has been positioned at the
+nominal height as measured in PAMELA (See the document: "Main geometrical
+parameters of the PAMELA sub-detectors" by O. Adriani, L. Bonechi,
+E. Mocchiutti, S. Ricciarini, 20 December 2005). Follows that the positions
+of S21Y and S12X are higher than those in the cited document due to the fact
+that in GPAMELA the thickness of the mylar has been considered while in the
+document it has been neglected. 
+
+
+May 2006, Bari & Tor Vergata
+
+GIGANTIC RESONANCE FOR NEUTRON DETECTOR ADDED
+
+   Routines to simulate the gigantic resonance of gammas in Tungsten
+   have been added.  The GPGIG routine is called in GUSTEP if a gamma
+   enter the calorimeter absorber.  This is the steering routine to
+   simulate the production of neutrons from gigantic resonance.  It
+   does checks on STEP lenght. If the range is smaller than the other
+   selected for that step, it does generate the neutron and stops the
+   gamma. Please note that the neutron has now a new particle
+   number. This is to tag the gigantic resonance neutrons.
+
+
 May 2006, Bari & Florence
 
 CAL HIT STRUCTURE BUGS FIXED
@@ -58,6 +92,24 @@
    number of hit.
    In this case in the ntple up to the maximum number of hits will be stored. 
 
+April 2006, Bari
+
+TOF GEOMETRY AND POSITIONS UPDATED AND NEW MIXTURES ADDED
+
+   The TOF geometry has been modified. The following boxes have been
+   added: POL1, POL2 and POLY made of polystyrene, S11M, S12M, S21M,
+   S22M, S31M and S32M made of mylar, S1A, S2A and S3 made of air and
+   S1 and S2 made of aluminum. Each scintillator paddle has been put
+   in his mylar box and the other materials: air, polystyrene, and
+   aluminum have been added at their nominal positions.  According to
+   Naples people the araldite glue has been simulated has an air
+   gap. For this work two new materials: the Mylar (MYLAR) and the
+   polystyrene (POLYSTYRENE) with a density of 35 g/l have been
+   defined as a mixture.  The positions of the three bottom
+   scintillator planes that contain respectively the S12X, S22Y and
+   S32X paddles have been regulated according on their official
+   positions in PAMELA.
+
 Mar 2006, Bari
 
 GEN DATA CARD UPDATED
@@ -120,6 +172,14 @@
    
 
 The GCALOR package 
+
+June 2005, Bari
+
+TOF SCINTILLATOR PADDLES UPDATED
+
+   The dimensions and the number of the scintillator paddles for each
+   TOF planes have been updated.
+
 May 2005, Bari
 
 Some updates on the latest modification done in the past year.