| 1 |
# |
# |
| 2 |
# $Id$ |
# $Id: v_100.txt,v 3.2 2002/12/05 10:17:42 pamela Exp $ |
| 3 |
|
# |
| 4 |
|
# $Log: v_100.txt,v $ |
| 5 |
|
# Revision 3.2 2002/12/05 10:17:42 pamela |
| 6 |
|
# Update CAS and CALO geometries and positions. Makefile updated as well |
| 7 |
|
# |
| 8 |
|
# Revision 3.1.1.1 2002/07/11 16:01:59 cafagna |
| 9 |
|
# First GPAMELA release on CVS |
| 10 |
# |
# |
|
# $Log$ |
|
| 11 |
# |
# |
| 12 |
#CMZ : 3.00/00 11/02/2002 20.05.23 by Unknown |
#CMZ : 3.00/00 11/02/2002 20.05.23 by Unknown |
| 13 |
#CMZ : 2.03/00 06/11/2000 02.14.56 by Francesco Cafagna |
#CMZ : 2.03/00 06/11/2000 02.14.56 by Francesco Cafagna |
| 21 |
#CMZ : 1.00/02 05/04/96 15.31.25 by Francesco Cafagna |
#CMZ : 1.00/02 05/04/96 15.31.25 by Francesco Cafagna |
| 22 |
#CMZ : 1.00/01 28/11/95 18.51.23 by Francesco Cafagna |
#CMZ : 1.00/01 28/11/95 18.51.23 by Francesco Cafagna |
| 23 |
#-- Author : Francesco Cafagna 28/11/95 |
#-- Author : Francesco Cafagna 28/11/95 |
| 24 |
|
|
| 25 |
|
4 November 2002, Bari |
| 26 |
|
|
| 27 |
|
CAS detectors distances modified |
| 28 |
|
|
| 29 |
|
The distances between the CAS detectors have been modified based on the |
| 30 |
|
latest CAD drawings. |
| 31 |
|
|
| 32 |
|
2 November 2002, Bari |
| 33 |
|
|
| 34 |
|
CALORIMETER geometry upgrade |
| 35 |
|
|
| 36 |
|
The volumes CAPD and CAAD have been taken off from the calorimeter. |
| 37 |
|
In addition the logical tree has been slightly changed to make the shifts of |
| 38 |
|
the silicon planes into the calorimeter box easier, i.e. the CAPL volume, |
| 39 |
|
which was made of the CASI, CAKP, CAGL, C10C and CAKA volumes, has |
| 40 |
|
been split up in the volumes CANS and CAPL. Now CANS is made of the CAKP, |
| 41 |
|
CAGL, C10C and CAKA volumes while CAPL contains the CASI volume, that has to |
| 42 |
|
be shifted as a function of the vertical position in the calorimeter. Also the |
| 43 |
|
dimensions of some volumes have been upgraded, including the external ones: |
| 44 |
|
CALB and CALS. CALS is an aluminum box of dimensions: 48.4*48.4*21.278 cm^3, |
| 45 |
|
having side-walls 1 cm thick and a bottom of 1 mm. The real box is more |
| 46 |
|
complicated and the configuration of the bottom should be upgraded if we want |
| 47 |
|
a reliable description of the event in the S4 scintillator. |
| 48 |
|
|
| 49 |
|
22 October 2002, Stockholm |
| 50 |
|
|
| 51 |
|
ANTICOINC. GEOMETRY UPGRADE |
| 52 |
|
|
| 53 |
|
The AC geometry has been updated. The top AC scintillator (CAT) now |
| 54 |
|
consists of 1 single sheet of scintillator with a hole in the middle |
| 55 |
|
and the correct geometry(*). The side AC scintillators (CAS) also |
| 56 |
|
have the correct shape. The AC scintillators are placed in aluminum |
| 57 |
|
boxes with plastic rims inside. For these rims a 'new' material, PLAS, |
| 58 |
|
was defined. PLAS has all the characteristics of SCIN but is |
| 59 |
|
non-sensitive. No PMTs or PMT holders have been modelled. |
| 60 |
|
(*)-The interfaces on CAT where the PMTs should be located are |
| 61 |
|
slightly different from the real case. |
| 62 |
|
|
| 63 |
11 February 2002, Bari |
11 February 2002, Bari |
| 64 |
|
|
| 65 |
MACRO CLEAN-UP |
MACRO CLEAN-UP |
Parent Directory
| 
Revision Log
| 
Patch