| 1 |
# |
# |
| 2 |
# $Id: v_100.txt,v 3.8 2005/12/14 03:16:08 cafagna Exp $ |
# $Id: v_100.txt,v 3.17 2006/10/13 16:36:59 pam-ba Exp $ |
| 3 |
# |
# |
| 4 |
# $Log: v_100.txt,v $ |
# $Log: v_100.txt,v $ |
| 5 |
|
# Revision 3.17 2006/10/13 16:36:59 pam-ba |
| 6 |
|
# Added a new material, the cadmium, for ND |
| 7 |
|
# |
| 8 |
|
# Revision 3.16 2006/10/12 11:11:21 pam-ba |
| 9 |
|
# ND geometry updated. |
| 10 |
|
# |
| 11 |
|
# Revision 3.15 2006/10/02 11:17:30 pam-ba |
| 12 |
|
# NDET 'SPHE' data card meaning changed. Now it eliminates the whole PAMELA container. |
| 13 |
|
# |
| 14 |
|
# Revision 3.14 2006/06/30 15:38:16 pam-ba |
| 15 |
|
# S22 and S12 heights positioned in GPAMELA at the nominal heights in PAMELA (see document: Main geometrical parameters of the PAMELA sub-detectors, 20 December 2005) |
| 16 |
|
# |
| 17 |
|
# Revision 3.13 2006/06/05 13:56:17 pamela |
| 18 |
|
# Gigantic resonance added for gamma enetering in the calorimeter absorber |
| 19 |
|
# |
| 20 |
|
# Revision 3.12 2006/05/18 10:52:32 pam-ba |
| 21 |
|
# TOF geometry completed and a new material, the polystyrene (density 35 g/l), added |
| 22 |
|
# |
| 23 |
|
# Revision 3.11 2006/05/11 23:53:15 cafagna |
| 24 |
|
# More bugs fixed in the CALO ntple structure filling |
| 25 |
|
# |
| 26 |
|
# Revision 3.10 2006/04/10 11:07:43 cafagna |
| 27 |
|
# GEN data card updated, ZDGEN added |
| 28 |
|
# |
| 29 |
|
# Revision 3.9 2005/12/14 03:34:40 cafagna |
| 30 |
|
# An update of the history and inform readme files. |
| 31 |
|
# |
| 32 |
# Revision 3.8 2005/12/14 03:16:08 cafagna |
# Revision 3.8 2005/12/14 03:16:08 cafagna |
| 33 |
# Neutron detector added. Geometry and GPCALOR package |
# Neutron detector added. Geometry and GPCALOR package |
| 34 |
# |
# |
| 67 |
#CMZ : 1.00/01 28/11/95 18.51.23 by Francesco Cafagna |
#CMZ : 1.00/01 28/11/95 18.51.23 by Francesco Cafagna |
| 68 |
#-- Author : Francesco Cafagna 28/11/95 |
#-- Author : Francesco Cafagna 28/11/95 |
| 69 |
|
|
| 70 |
|
November 2006, Bari |
| 71 |
|
|
| 72 |
|
TOF POSITIONS DEFINITELY UPDATED: |
| 73 |
|
S2 and S1 have been positioned again, after the simulation of the top plate. |
| 74 |
|
Before now, the positions were put ad hoc based on the positions given by |
| 75 |
|
Sergio Ricciarini in the document 'Main geometrical parameters of the PAMELA |
| 76 |
|
sub-detectors' released by O. Adriani, L. Bonechi, E. Mocchiutti and |
| 77 |
|
S. Ricciarini on the 20th of December 2005.. These positions were |
| 78 |
|
lightly approximated. |
| 79 |
|
|
| 80 |
|
ND GEOMETRY COMPLETED. |
| 81 |
|
The He3 and the polyethylene (CH2) have been added to fill |
| 82 |
|
the volumes NDTI and NDPB in the neutron detector. Leonov gave us the |
| 83 |
|
details of these materials. |
| 84 |
|
|
| 85 |
|
TOP PLATE GEOMETRY ADDED. |
| 86 |
|
The top plate geometry has been simulated as a N2 box that has the same |
| 87 |
|
dimensions of CATA. Inside it, at the right positions, there are S2 and CATA. |
| 88 |
|
The real top plate is a rectangular window having a thickness of 0.5 cm |
| 89 |
|
(volume TPTL emptied by the volume TPCV). This volume is filled with a mixture |
| 90 |
|
of titanium (90%), aluminum (6%) and vanadium (4%). Other parts of titanium |
| 91 |
|
are the four volumes TPTU, which are positioned at the corners of TPTL at the |
| 92 |
|
same height of CATA, and the four volumes TPTM, which are positioned at the |
| 93 |
|
corners of TPTL, at the same height of S2. |
| 94 |
|
The geometry of the top plate is based on a simplified version of the CAD |
| 95 |
|
drawings. |
| 96 |
|
|
| 97 |
|
October 2006, Bari |
| 98 |
|
|
| 99 |
|
The geometry of the neutron detector has been updated. Some dimensions of some |
| 100 |
|
volumes have been corrected and the aluminum cover and the aluminum boxes to |
| 101 |
|
put the cables have been added. A new material, the cadmium, has been also |
| 102 |
|
defined. |
| 103 |
|
|
| 104 |
|
September 2006, Bari |
| 105 |
|
|
| 106 |
|
SPHE and ND data card bugs fixed: the definition of the ND data card, |
| 107 |
|
missing in the subroutine gpgeo.F, has been added; the meaning of the SPHE |
| 108 |
|
data card has been changed. Before the correction the data card: |
| 109 |
|
NDET 'SPHE' was used to delete the spherical top shell to substitute it with |
| 110 |
|
a flat one.Now NDET 'SPHE' eliminates the whole container of PAMELA. |
| 111 |
|
|
| 112 |
|
|
| 113 |
|
June 2006, Bari |
| 114 |
|
|
| 115 |
|
The center of the scintillator planes S22Y (variable ZPAMS22Y in gpdgeo.inc) |
| 116 |
|
and S12X (variable ZPAMS12X in gpdgeo.inc) has been positioned at the |
| 117 |
|
nominal height as measured in PAMELA (See the document: "Main geometrical |
| 118 |
|
parameters of the PAMELA sub-detectors" by O. Adriani, L. Bonechi, |
| 119 |
|
E. Mocchiutti, S. Ricciarini, 20 December 2005). Follows that the positions |
| 120 |
|
of S21Y and S12X are higher than those in the cited document due to the fact |
| 121 |
|
that in GPAMELA the thickness of the mylar has been considered while in the |
| 122 |
|
document it has been neglected. |
| 123 |
|
|
| 124 |
|
|
| 125 |
|
May 2006, Bari & Tor Vergata |
| 126 |
|
|
| 127 |
|
GIGANTIC RESONANCE FOR NEUTRON DETECTOR ADDED |
| 128 |
|
|
| 129 |
|
Routines to simulate the gigantic resonance of gammas in Tungsten |
| 130 |
|
have been added. The GPGIG routine is called in GUSTEP if a gamma |
| 131 |
|
enter the calorimeter absorber. This is the steering routine to |
| 132 |
|
simulate the production of neutrons from gigantic resonance. It |
| 133 |
|
does checks on STEP lenght. If the range is smaller than the other |
| 134 |
|
selected for that step, it does generate the neutron and stops the |
| 135 |
|
gamma. Please note that the neutron has now a new particle |
| 136 |
|
number. This is to tag the gigantic resonance neutrons. |
| 137 |
|
|
| 138 |
|
|
| 139 |
|
May 2006, Bari & Florence |
| 140 |
|
|
| 141 |
|
CAL HIT STRUCTURE BUGS FIXED |
| 142 |
|
|
| 143 |
|
The maximum number of hit is now different for the two hit |
| 144 |
|
structures: CALST and CALI. Vectors inizialization and HBOOK |
| 145 |
|
ntple booking have been updated. The GPDCAL routine has been fixed |
| 146 |
|
so to handle the case in wich hits stored are more than the maximum |
| 147 |
|
number of hit. |
| 148 |
|
In this case in the ntple up to the maximum number of hits will be stored. |
| 149 |
|
|
| 150 |
|
April 2006, Bari |
| 151 |
|
|
| 152 |
|
TOF GEOMETRY AND POSITIONS UPDATED AND NEW MIXTURES ADDED |
| 153 |
|
|
| 154 |
|
The TOF geometry has been modified. The following boxes have been |
| 155 |
|
added: POL1, POL2 and POLY made of polystyrene, S11M, S12M, S21M, |
| 156 |
|
S22M, S31M and S32M made of mylar, S1A, S2A and S3 made of air and |
| 157 |
|
S1 and S2 made of aluminum. Each scintillator paddle has been put |
| 158 |
|
in his mylar box and the other materials: air, polystyrene, and |
| 159 |
|
aluminum have been added at their nominal positions. According to |
| 160 |
|
Naples people the araldite glue has been simulated has an air |
| 161 |
|
gap. For this work two new materials: the Mylar (MYLAR) and the |
| 162 |
|
polystyrene (POLYSTYRENE) with a density of 35 g/l have been |
| 163 |
|
defined as a mixture. The positions of the three bottom |
| 164 |
|
scintillator planes that contain respectively the S12X, S22Y and |
| 165 |
|
S32X paddles have been regulated according on their official |
| 166 |
|
positions in PAMELA. |
| 167 |
|
|
| 168 |
|
Mar 2006, Bari |
| 169 |
|
|
| 170 |
|
GEN DATA CARD UPDATED |
| 171 |
|
|
| 172 |
|
To enable generation on a surface perpendicular to the XY plane, |
| 173 |
|
GEN gata card has been updated addingh a new parameter: ZDGEN. This is |
| 174 |
|
the dimension, along Z axis , of the generation surface. The Z |
| 175 |
|
position will be randomply chosen according to: Z= ZDGEN*RNDM_NUMBER + |
| 176 |
|
ZGEN, i.e. Z= GEN(6)*RNDM_NOMBER + GEN(3). |
| 177 |
|
|
| 178 |
Nov 2005, Bari |
Nov 2005, Bari |
| 179 |
|
|
| 180 |
GUHADR AND GUPHAD UPDATED |
GUHADR AND GUPHAD UPDATED |
| 227 |
|
|
| 228 |
|
|
| 229 |
The GCALOR package |
The GCALOR package |
| 230 |
|
|
| 231 |
|
June 2005, Bari |
| 232 |
|
|
| 233 |
|
TOF SCINTILLATOR PADDLES UPDATED |
| 234 |
|
|
| 235 |
|
The dimensions and the number of the scintillator paddles for each |
| 236 |
|
TOF planes have been updated. |
| 237 |
|
|
| 238 |
May 2005, Bari |
May 2005, Bari |
| 239 |
|
|
| 240 |
Some updates on the latest modification done in the past year. |
Some updates on the latest modification done in the past year. |
Parent Directory
| 
Revision Log
| 
Patch