*
* $Id: gpdgeo.inc,v 3.2 2002/12/05 10:17:42 pamela Exp $
*
* $Log: gpdgeo.inc,v $
* Revision 3.2  2002/12/05 10:17:42  pamela
* Update CAS and CALO geometries and positions. Makefile updated as well
*
* Revision 3.1.1.1  2002/07/11 16:01:59  cafagna
* First GPAMELA release on CVS
*
*
*
* gpdgeo.inc
*
*                16/07/2004  16.44.06  by  Alexey Bakaldin
*                17/10/2002  22.31.45  by  Jens Lund
*CMZ :  3.00/00 14/11/2000  09.13.05  by  Emiliano Mocchiutti
*CMZ :  2.02/00 12/10/2000  18.43.21  by  Francesco Cafagna
*CMZ :  2.01/00 05/04/2000  14.35.17  by  Marialuigia Ambriola
*CMZ :  2.00/00 03/03/2000  15.39.05  by  Francesco Cafagna
*CMZ :  1.02/00 04/02/2000  18.40.04  by  Francesco Cafagna
*CMZ :  1.01/00 06/05/96  11.40.48  by  Francesco Cafagna
*CMZ :  1.00/02 02/04/96  16.44.16  by  Francesco Cafagna
*-- Author :    Francesco Cafagna   05/12/95
      DATA PAME/0.,53.,130./
*     AB:
C     DATA SHEL/69.8,70.,75./
cml		DATA SHEL/40.6,52.35,52.5,43.62253,43.77253/
cml		DATA MSHE/52.25,52.5,20./
cml		DATA BSPH/52.25,52.5,90.,180.,0.,360./
cml:
        DATA SHEL/38.25,52.5,52.65,43.77,43.92/
        DATA MSHE/52.5,52.75,20./
        DATA BSPH/52.5,52.75,90.,180.,0.,360./
c     end ml
*     END: AB.
C     DATA TFLA/126.8,127.,0.,33.45,0.,360./
        DATA TFLA/0.,43.77253,0.125/
*     AB:
C     DATA TSPH/0., 150.,0.,0.,0.,360./
cml		DATA TSPH/239.83,240.,0.,0.,0.,360./
cml:
        DATA TSPH/239.83,240.,0.,0.,0.,360./
c     end ml.
*     END: AB.
        DATA GAPTOP/2./
c ml:26/10/04        
c     DATA S11/22.,19.2,.45/
        DATA S11/20.4,16.5,.375/
c     DATA S12/22.,19.2,.45/
        DATA S12/20.4,16.5,.375/
c     DATA S21/9.,7.2,.35/
        DATA S21/9.,7.5,.375/
c     DATA S22/9.,7.2,.35/
        DATA S22/9.,7.5,.375/
c ml: 28/10/04:
c dimensions of top plate. At the moment, it is a reduced version,
c i.e. a gap of gas with a surface equal to S21. 
        DATA TPLA/9.,7.5,.25/ 
c end ml.
c     DATA S31/9.,7.2,.35/
        DATA S31/9.,7.5,.40/
c     DATA S32/9.,7.2,.35/
        DATA S32/9.,7.5,.40/
c end ml:
        DATA S4/18.,16.,.5/
        DATA SCTIC/0.025/
c ml:26/10/04:
c        DATA NS11X/9/
        DATA NS11Y/8/
c     DATA NS12Y/9/
        DATA NS12X/6/
c     DATA NS21X/4/
        DATA NS21X/2/
c     DATA NS22Y/4/
        DATA NS22Y/2/
c     DATA NS31Y/4/
        DATA NS31Y/3/
c     DATA NS32X/4/
        DATA NS32X/3/
c end ml.
        DATA ZS11,ZS12,ZS21,ZS22,ZS31,ZS32,ZS4
c ml 22/10/04:
c     +  /107.8,106.8,74.9,74.1,27.1,26.3,2.3/
c ml 28/10/04: introducing the top plate and calculating the zpos of S21, S22 
c starting from the zpos of CATA:
c     +   /106.66,105.66,74.9,74.1,27.1,26.3,2.3/
     +   /106.66,105.66,74.875,74.125,27.1,26.3,2.3/
        DATA ZTPLA/73.5/
c end ml 28/10/04
c end ml 22/10/04:
C CAT data
*EM:
*JeL:
	DATA CATA/28.0,0.6,27.165/
*END: JeL.
c        DATA CATB/22.05,21.05,0.55/
        DATA CATB/22.2,21.3,0.5/
c        DATA CATL/15.75,6.675,0.55/
c        DATA CATT/6.3,14.375,0.55/
        DATA CATL/2.6,14.9,0.4/
        DATA CATT/8.45,21.2,0.4/
        DATA CATH/9.4,7.7,0.5/
        DATA CATF/2.6,3.15,0.4/
        DATA CATO/9.3,0.05,0.5/
        DATA CATP/0.05,7.7,0.5/
        DATA ZCAT/75.85/
C CAS data
*EM:
*JeL:
	DATA CASA/21.45,0.6,20.55/
*END: JeL.
C        DATA CASX/15.25,0.55,23./
C        DATA CASY/0.55,14.75,23./
        DATA CSSX/15.7,0.5,21.6/
        DATA CSSY/0.5,15.7,21.6/
        DATA CASX/15.6,0.4,21.5/
        DATA CASY/0.4,15.6,21.5/
        DATA CASXD/2.4/
        DATA CASYD/2.2/
	DATA ZCAS/51.25/
*END: EM.
C TRD data
c ml: 11/11/04
c        DATA TRFR/19,17.5,.2/
        DATA TRFR/21.1,19.0,.275/
        DATA TRFD/19.75,13.9,.2425/
        DATA TRFU/19.4,13.55,.2425/
        DATA TRFM/21.1,19.0,0.1375/
        DATA TRFL/20.175,14.325,1.13/
c        DATA TRFI/15.5,14.,.2/
        DATA TRR0/21.1,38.5,.25/
        DATA TRI0/10.65,8.85,.15/
        DATA TRRF/16.0,15.4,0.1/
        DATA TRRI/9.8,8.0,0.1/
c end ml.
        DATA TRBS/3.3,18.3,1./
*ml: 10/11/66:
        DATA TRAL/3.3,2.15,1./
        DATA TRR2/19.025,13.175,1.51/
*end ml.
        DATA TRDS/24.,24.5,13.5/
        DATA TRDT/3.,3.,.25/
        DATA TRDB/17.7,18.5,0/
        DATA TRSO/0.197,0.2,14./
C        DATA TRSI/0.,0.197,14./
        DATA TRSI/0.,0.2,14./
*ml: 12/11/04:
c        DATA TRRA/13.2,14.,0/
        DATA TRRA/18.25,12.4,0.76/
*end ml.
*ml: 17/11/04:
c        DATA TRAN/1.75,1.75,1.0/
c        DATA TRAI/1.75,1.65,0.9/
        DATA TRAN/1.8,1.8,1.0/
        DATA TRAI/1.0,1.0,1.0/
*end ml.
        DATA ZTRD/90.55/
        DATA GAPTRD/1.5/
C Spectrometer data
        DATA SPEB/12.,11.4,0./
c ml: 26/10/04:
c     DATA MGPL/12.,11.4,4.05/
        DATA MGPL/12.,11.4,4.0/
c     DATA MGPI/8.05,6.55,4.05/
        DATA MGPI/8.1,6.6,4.0/
c ml:17/12/04:
c        DATA TRPB/12.,11.4,0.4/
        DATA TRPB/10.49,12.15,0.365/
ccc ml: 20/04/05:
cc        DATA TRPL/0.,7.,0.4/
c        DATA TRPL/0.,10.125,0.4/
ccc        DATA TRPL/8.1,9.75,0.365/
        DATA TPAI/8.0995,8.5,0.055/
        DATA TPAS/8.0995,9.75,0.06/
c        DATA TRSL/0.,7.,0./
        DATA TRSL/2.6665,7.,0.015/
c        DATA TSPA/2.666,3.5,0.015/
        DATA TSPA/2.596,3.413,0.015/
        DATA THBP/2.6665,2.75,0.015/
c        DATA TRCP/0.005,7.,0.3/
        DATA TRCP/0.025,10.125,0.25/
        DATA ZSPEC/50.6/
        DATA NTRSL/3/
        DATA NTHBP/3/
c     end ml.
C Calorimeter data
*EM:
*        DATA CASI/3.9,3.9,0.019/
        DATA CASI/3.904,3.904,0.019/
*F.V.&ML:
C        DATA CG10/12.1,12.1,0.0875/
C        DATA C10C/12.1,12.1,0.08/
C        DATA CAAB/12.1,12.1,0.133/
C        DATA CAPL/12.1,12.1,0./
C        DATA CAAD/12.1,12.1,0.133/
C        DATA CAPD/12.1,12.1,0./
C        DATA CALB/19.7,19.7,10.2/
        DATA CG10/12.3,12.3,0.0875/
        DATA C10C/12.3,12.3,0.08/
        DATA CAAB/12.3,12.3,0.1315/
        DATA CAPL/12.3,12.3,0./
	DATA CANS/12.3,12.3,0./
        DATA CAAD/12.3,12.3,0.133/
        DATA CAPD/12.3,12.3,0./
*ML:
*	DATA CALB/19.7,19.7,10.45/
	DATA CALB/23.2,23.2,10.589/
*END ML.
*END F.V.&ML.
*ML:
*        DATA CALS/20.,20.,10.5/
        DATA CALS/24.2,24.2,10.639/
        DATA ZCAL/13.05/
C with ZCAL=13.03 the distance between the bottom of the magnet and
C the top of the top silicon strips is about 44.24 mm, as it has to be
C if 37 mm is the height of the base plate and 7.24 mm is the distance 
C between the bottom of the end of the base plate and the top silicium 
C strips. Because of the difference is small and the height of the base
C plate could be approximate, I left ZCAL=13.05.  
C	DATA ZCAL/13.03/
*END ML.
*        DATA CALSTWID/0.36/
        DATA CALSTWID/0.244/
*
* NOTE: IF you change NCAPL, remember to modify the NCPL, NCSI, NOCAPL,
*     NOCASI array dimentions in $GPKEY, $GPDKEY common and data block.
*     The corresponding FFKEY call in GPFFR must be changed as well.
*     The GPDAT loop on these arrays should be checked too.
*
        DATA NCAPL/22/
        DATA NCAPLD/1/
C        DATA DCASIX/0.3/
*F.V.&ML:
C        DATA DCASIX/0.292/
        DATA DCASIX/0.242/
*END F.V.&ML.
C        DATA DCASIY/0.3/
* F.V.&FRA:
C        DATA DCASIY/0.292/
        DATA DCASIY/0.242/
* END F.V.&FRA
	DATA DCASIZ/0.15/
        DATA NCASTR/32/
*
* F.V.&ML:
C        DATA CAKA/12.,12.1,0.005/
C        DATA CAGL/12.,12.1,0.005/
C        DATA CAKP/12.,12.1,0.0025/
        DATA CAKA/12.3,12.3,0.0025/
        DATA CAGL/12.3,12.3,0.005/
        DATA CAKP/12.3,12.3,0.0025/
* END F.V.&ML.
*END EM.
C