/[PAMELA software]/chewbacca/PamOffLineSW/forroutines/tracker/readraw/trkunpack.f
ViewVC logotype

Contents of /chewbacca/PamOffLineSW/forroutines/tracker/readraw/trkunpack.f

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1.1.1.1 - (show annotations) (download) (vendor branch)
Tue Sep 23 07:20:17 2008 UTC (16 years, 2 months ago) by mocchiut
Branch: v0r00, MAIN
CVS Tags: v1r02, v1r00, v1r01, start, v10RED, v9r00, v9r01, HEAD
Changes since 1.1: +0 -0 lines
Imported sources, 23/09/2008

1 *************************************************************************
2 * 20/1/2006 modified by elena vannuccini to code error flag
3 * 10/9/2005 modified by david fedele to read buffer-data
4 * instead raw-data-file
5 * 29/11/2005 modified by david fedele to include crc control
6 * 24/06/2006 modified by elena vannuccini
7 * 25/06/2006 modified by david fedele
8 *************************************************************************
9
10 subroutine trkeventpkt(YODAflag,buffer,length_buffer,curpos)
11
12 include '../common/commontracker.f'
13 include '../common/common_readraw.f'
14 include '../common/level0.f'
15
16 logical ALARMS
17 integer runerror !readevent error flag
18 integer*1 crctemp
19
20 * -------------------
21 * initializations
22 * ---------------------------------------------------
23 * the general flag YODAflag contains information
24 * about the integrity of the DSP packets.
25 *
26 * If some packets are missing or the crc check fails,
27 * YODAflag is asserted
28 * ---------------------------------------------------
29 YODAflag=1 !bad by default
30 call initlevel0
31 ALARMS=.false.
32 npkt=0 !#good DSP packets
33 startcrc=0
34 stopcrc=0
35 crctemp=0
36 * -------------------
37
38 * ===================================
39 if(length_buffer.gt.MAXBUFFLEN)then
40 c print*,'trkeventpkt: buffer() size must be at least '
41 c $ ,length_buffer,' !!!!'
42 goto 2222
43 endif
44 * ===================================
45
46
47 do iview=1,nviews !loop on DSPs
48 call searchtrkheader(runerror,buffer,length_buffer,curpos,
49 $ startcrc)
50 if(runerror.eq.1.or.runerror.eq.-1) then
51 * --------------------------------------------------
52 * no DSP packet has been found ==> go to end
53 * --------------------------------------------------
54 goto 2222 !go to end
55 endif
56
57 if(checkheader.ne.2) then
58 print*,'>>>> ERROR <<<< (trkeventpkt)'
59 print*,'>>>> CPU packet type ',!pkt_type,
60 $ ' does not match DSP packet type ',checkheader
61 DAQmode_temp = ishft(iand(header(1),z'03f0'),-4)
62 DSPnumber_temp = iand(header(1),z'000f')
63 print*,' -----------------------------------'
64 $ ,iview
65 print*,' DSP number-----',int(DSPnumber_temp)
66 print*,' DAQ mode-------',int(DAQmode_temp)
67 print*,' -----------------------------------'
68 goto 2525 !next view (==> search another DSP header)
69 endif
70
71 call unpackdata(runerror,buffer,length_buffer,curpos,
72 $ startcrc,stopcrc,crctemp)
73 if(runerror.eq.-1.or.runerror.eq.1)then
74 goto 2222 !go to end
75 else if(runerror.eq.2) then
76 crc_dat=2 !flag for corrupted packet
77 endif
78
79 npkt = npkt + 1
80 call fillview(iview)
81 *--------CRC check
82 if(crc(iview).eq.0.or.crc(iview).eq.2) then !OK
83 *----------- ALARMS
84 if(
85 $ fl1(iview).ne.0.or.
86 $ fl2(iview).ne.0.or.
87 $ fl3(iview).ne.0.or.
88 $ fl4(iview).ne.0.or.
89 $ fl5(iview).ne.0.or.
90 $ fl6(iview).ne.0.or.
91 $ fc(iview).ne.0.or.
92 $ DATAlength(iview).eq.0.or.
93 $ .false.)ALARMS=.true.
94 endif
95
96 2525 continue
97 enddo !end loop on views
98
99 2222 continue
100
101 if(npkt.eq.nviews)YODAflag=0
102 if(YODAflag.eq.0.and.(ALARMS.eqv..false.))good0=1
103
104 return
105 end
106
107 * **********************************************************
108 * * *
109 * * *
110 * * *
111 * * *
112 * * *
113 * **********************************************************
114
115 subroutine trkcalibpkt(YODAflag,buffer,length_buffer,curpos
116 $ )
117
118 include '../common/commontracker.f'
119 include '../common/common_readraw.f'
120 include '../common/trk_calib_parameters.f'
121
122 logical ALARMs
123 integer runerror !readevent error flag
124 integer*1 crctemp
125
126 * -------------------
127 * initializations
128 * ---------------------------------------------------
129 * the general flag YODAflag contains information
130 * about the integrity of the DSP packets.
131 *
132 * If some packets are missing or the crc check fails,
133 * YODAflag is asserted
134 * ---------------------------------------------------
135 YODAflag = 1 !bad by default
136 call initcalib
137 ALARMS=.false.
138 npkt=0 !#good DSP packets
139 startcrc=0
140 stopcrc=0
141 crctemp=0
142 * -------------------
143
144 * ===================================
145 if(length_buffer.gt.MAXBUFFLEN)then
146 c print*,'trkeventpkt: buffer() size must be at least '
147 c $ ,length_buffer,' !!!!'
148 goto 2222
149 endif
150 * ===================================
151
152 do iview=1,nplanes !loop on views (DSP pkt)
153 call searchtrkheader(runerror,buffer,length_buffer,curpos,
154 $ startcrc)
155
156 if(runerror.eq.1.or.runerror.eq.-1) then
157 goto 2222 !end loop on views (DSP pkt)
158 endif
159
160 if(checkheader.ne.3) then
161 print*,'>>>> ERROR <<<< (trkcalibpkt)'
162 print*,'>>>> CPU packet type ',!pkt_type,
163 $ ' does not match DSP type ',checkheader
164 DAQmode_temp = ishft(iand(header(1),z'03f0'),-4)
165 DSPnumber_temp = iand(header(1),z'000f')
166 print*,' -----------------------------------'
167 $ ,iview
168 print*,' DSP number-----',int(DSPnumber_temp)
169 print*,' DAQ mode-------',int(DAQmode_temp)
170 print*,' -----------------------------------'
171 goto 2424 !next view (==> search another DSP header)
172 endif
173
174 call unpackcalibration(runerror,buffer,length_buffer,curpos,
175 $ startcrc,stopcrc,crctemp)
176 if(runerror.eq.-1.or.runerror.eq.1)then
177 goto 2222 !end
178 endif
179
180
181 npkt = npkt + 1
182 call fillview_cal(iview) !
183 *--------CRC check
184 if( crc_hcal(iview).eq.0.and.
185 $ crc_cal(iview,1).eq.0.and.
186 $ crc_cal(iview,2).eq.0.and.
187 $ crc_cal(iview,3).eq.0.and.
188 $ .true.)then
189 *----------- ALARMS
190 if( ncalib_event(iview).ne.0.or.
191 $ cal_flag(iview).ne.0.or.
192 $ .false.)ALARMS=.true.
193 endif
194
195 2424 continue
196 enddo ! end loop on views (calibration pkt)
197
198 2222 continue
199
200 if(npkt.eq.nplanes)YODAflag=0
201 if(YODAflag.eq.0.and.(ALARMS.eqv..false.))good0=1
202
203 return
204 end
205
206 * **********************************************************
207 * * *
208 * * *
209 * * *
210 * * *
211 * * *
212 * **********************************************************
213
214 subroutine searchtrkheader(runerror,buffer,length_buffer,
215 $ curpos,startcrc)
216 C.............................................................
217 C Search for a valid tracker DSP header (=>one view)
218 C and return the type of header
219 C.............................................................
220
221 include '../common/commontracker.f'
222 include '../common/common_readraw.f'
223
224 integer runerror !readevent error flag
225
226 c--------------------------------------------------
227 c N.B.13 bit packing is done for each DSP header+datablock,
228 C so each DSP 13 bit
229 c first word starts at the beginnig of a 16 bit word
230 c--------------------------------------------------
231
232 9100 continue
233 runerror=0 !error flag initialization
234 checkheader=0
235
236 c--------------------------------------------------
237 c looks for a DSP header beginning
238 C (a word beginning with 1110)
239 c--------------------------------------------------
240
241 call findstart(runerror,buffer,length_buffer,curpos)
242
243 if(runerror.eq.1) goto 200 !end
244 if(runerror.eq.-1)goto 200 !end
245 c--------------------------------------------------
246 c the first word could be a DSP header first word:
247 C reads 13 8-bit words and
248 c writes them in 16 13-bit words to check for all
249 C DSP header features
250 c--------------------------------------------------
251
252 call hunpacker(header,runerror,buffer,length_buffer,curpos,
253 $ startcrc)
254
255 if(runerror.eq.1) goto 200 !end
256 if(runerror.eq.-1)goto 200 !end
257 c--------------------------------------------------
258 c extracts and controls header:
259 c--------------------------------------------------
260 C last header word must be:
261 c |0001|1100|0000|0000| for acquisition
262 c |0001|1111|1111|1111| for calibration
263 c--------------------------------------------------
264 if(iand(header(16),z'ffff').eq.z'1c00') then
265 checkheader=2 ! event packet
266 elseif(iand(header(16),z'ffff').eq.z'1fff') then
267 checkheader=3 ! calibration packet
268 else
269 checkheader=1 ! not a valid DSP header
270 endif
271 c--------------------------------------------------
272 c first header word must be:
273 c |0001|110x|xxxx|xxxx|
274 c--------------------------------------------------
275 if(iand(header(1),z'fe00').ne.z'1c00')
276 $ checkheader=1 !not a valid DSP header
277 c--------------------------------------------------
278 c intermediate header words must be:
279 c |0001|010x|xxxx|xxxx|
280 c--------------------------------------------------
281 do i=2,15
282 if(iand(header(i),z'fc00').ne.z'1400')
283 $ checkheader=1 !not a valid DSP header
284 enddo
285 c--------------------------------------------------
286 c if checkheader = 1
287 c then this is not a DSP header (or some
288 c noise lurks around) so go a word ahead and
289 c try again
290 c--------------------------------------------------
291 if(checkheader.eq.1) then
292 curpos=curpos-(13*2)+1 !goes back 13 words, then half 16 bit word ahead
293 goto 9100
294 endif
295
296 200 continue
297 end
298
299 * **********************************************************
300 * * *
301 * * *
302 * * *
303 * * *
304 * * *
305 * **********************************************************
306
307 subroutine unpackcalibration(runerror,buffer,length_buffer,curpos,
308 $ startcrc,stopcrc,crctemp)
309
310 *.............................................................
311 * decode calibration data
312 * header + data(PED SIG BAD) + trailer
313 *............................................................
314 include '../common/commontracker.f'
315 include '../common/common_readraw.f'
316
317 integer*1 crctemp
318 integer*1 crc_trail
319
320 integer runerror !readevent error flag
321 integer*2 templ(nstrips_ladder)
322 real*4 tempf(nstrips_ladder)
323
324
325
326 12 format(z4)
327
328 *-----------------------------------------------------------
329 * HEADER
330 * (N.B. during test 2003 the header of calibration packets
331 * was only partially filled)
332 *
333 * the following is the final calibration header
334 *-----------------------------------------------------------
335 DAQmode_cal = ishft(iand(header(1),z'03f0'),-4)
336 DSPnumber_cal = iand(header(1),z'000f')
337 dataword = ior(ishft(iand(header(2),z'03ff')
338 $ ,10),iand(header(3),z'03ff'))
339 calibrationnumber = iand(header(4),z'03ff')
340 nused_event = iand(header(5),z'03ff')
341 ped_1 = iand(header(6),z'03ff')
342 ped_2 = iand(header(7),z'03ff')
343 ped_3 = iand(header(8),z'03ff')
344 ped_1 = ped_1 * 4
345 ped_2 = ped_2 * 4
346 ped_3 = ped_3 * 4
347 sig_1 = iand(header(9),z'03ff')
348 sig_2 = iand(header(10),z'03ff')
349 sig_3 = iand(header(11),z'03ff')
350 nbad_1 = iand(header(12),z'03ff')
351 nbad_2 = iand(header(13),z'03ff')
352 nbad_3 = iand(header(14),z'03ff')
353 ff = ishft(iand(header(15),z'0300'),-8)
354 checksum_cal = iand(header(15),z'00ff')
355 c-----------------------------------------------------------
356 c the checksum is a 8-bit word calculated as the
357 c XOR of the 16-bit data words,
358 c hence the XOR between the two halfs
359 C----------------------------------------------------------
360
361 runerror=0
362 c$$$
363 c$$$ print*,'-----------------------------------'
364 c$$$ print*,'unpackcalibration: readtrailer --- ',
365 c$$$* $ trailer,runerror,buffer,length_buffer,curpos,
366 c$$$ $ startcrc,stopcrc,crctemp
367 c$$$ print*,'-----------------------------------'
368 call readtrailer(trailer,runerror,buffer,length_buffer,curpos,
369 $ startcrc,stopcrc,crctemp)
370
371 crc_trail=iand(trailer(3),z'00ff')
372
373 c$$$ print *,'@@@@@@@@@@@@@ ',crctemp,crc_trail
374
375 if (crctemp.eq.crc_trail)then
376 crc_hcalib=0
377 else
378 crc_hcalib=1
379 endif
380
381 do il=1,3 !loop on ladders
382 startcrc=curpos
383 call readped(tempf,runerror,buffer,length_buffer,curpos)
384 do is=1,nstrips_ladder
385 iss=is+nstrips_ladder*(il-1)
386 DSPped_o(DSPnumber_cal,iss)=tempf(is)
387 enddo
388
389 call readsig(tempf,runerror,buffer,length_buffer,curpos)
390 do is=1,nstrips_ladder
391 iss=is+nstrips_ladder*(il-1)
392 DSPsig_o(DSPnumber_cal,iss)=tempf(is)
393 enddo
394
395 call readbad(templ,runerror,buffer,length_buffer,curpos)
396 do is=1,nstrips_ladder
397 iss=is+nstrips_ladder*(il-1)
398 DSPbad_o(DSPnumber_cal,iss)=templ(is)
399 enddo
400
401 11 format(i1,' ',z4)
402
403 call readtrailer(trailer,runerror,buffer,length_buffer,curpos,
404 $ startcrc,stopcrc,crctemp)
405
406 crc_trail=iand(trailer(3),z'00ff')
407
408 if (crctemp.eq.crc_trail)then
409 crc_calib(il)=0
410 else
411 crc_calib(il)=1
412 endif
413
414 enddo !end loop on ladders
415
416 return
417 end
418
419 * **********************************************************
420 * * *
421 * * *
422 * * *
423 * * *
424 * * *
425 * **********************************************************
426
427 subroutine unpackdata(runerror,buffer,length_buffer,curpos,
428 $ startcrc,stopcrc,crctemp)
429
430 *.............................................................
431 * decode event data
432 * header + data + trailer
433 *............................................................
434
435 include '../common/commontracker.f'
436 include '../common/common_readraw.f'
437 include '../common/level0.f'
438
439 integer*1 crctemp
440 integer*1 crcdat
441
442 integer runerror !readevent error flag
443 c integer l_tra
444
445 integer bid1_dat,bid2_dat,bid3_dat,bid4_dat,bid5_dat,bid6_dat
446 $ ,bid7_dat,bid_dat_sum
447
448
449 12 format(z4)
450
451 *-----------------------------------------------------------
452 * HEADER
453 *-----------------------------------------------------------
454
455 DAQmode_dat = ishft(iand(header(1),z'03f0'),-4)
456 DSPnumber_dat = iand(header(1),z'000f')
457 C ------------------------------------------------------
458 c words 2 and 3 give the number of transmitted 16-bit
459 c words ( 13 header words + data )
460 c NB: data are packed from 13-bit to 16-bit words,
461 c so the stream is complited with zeros in order to have
462 c a number of bits multiple of 16
463 C ------------------------------------------------------
464 l_tra = ior(ishft(iand(header(2),z'03ff')
465 $ ,10),iand(header(3),z'03ff'))
466 l_tra=l_tra-13
467 C ------------------------------------------------------
468 eventn_dat = ior(ishft(iand(header(4),z'03ff')
469 $ ,10),iand(header(5),z'03ff'))
470 nclust_dat = ishft(iand(header(6),z'0380'),-7)
471 cutc_dat = ishft(iand(header(6),z'0070'),-4)
472 cutcl_dat = iand(header(6),z'000f')
473 addrcluster_dat(1) = iand(header(7),z'03ff')
474 signcluster_dat(1) = iand(header(8),z'03ff')
475 addrcluster_dat(2) = iand(header(9),z'03ff')
476 signcluster_dat(2) = iand(header(10),z'03ff')
477 addrcluster_dat(3) = iand(header(11),z'03ff')
478 signcluster_dat(3) = iand(header(12),z'03ff')
479 fc_dat = ishft(iand(header(13),z'0300'),-8)
480 compressiontime_dat = iand(header(13),z'00ff')
481 c fl5_dat = ishft(iand(header(14),z'0300'),-8)
482 c fl4_dat = ishft(iand(header(14),z'0300'),-6)
483 c fl3_dat = ishft(iand(header(14),z'0300'),-4)
484 c fl2_dat = ishft(iand(header(14),z'0300'),-2)
485 c fl1_dat = iand(header(14),z'0300')
486 c fl6_dat = ishft(iand(header(15),z'0300'),-8)
487 fl5_dat = iand(ishft(header(14),-8),z'0003')
488 fl4_dat = iand(ishft(header(14),-6),z'0003')
489 fl3_dat = iand(ishft(header(14),-4),z'0003')
490 fl2_dat = iand(ishft(header(14),-2),z'0003')
491 fl1_dat = iand(header(14),z'0003')
492 fl6_dat = iand(ishft(header(15),-8),z'0003')
493 checksum_dat = iand(header(15),z'00ff')
494
495 c-----------------------------------------------------------
496 c the cheacksum is a 8-bit word calculated as the
497 c XOR of the 16-bit data words,
498 c hence the XOR between the two halfs
499 C----------------------------------------------------------
500 runerror=0
501 nqualcosa=0
502 c if(l_tra.eq.0)then
503 if(l_tra.le.0)then
504 goto 18 !empty buffer
505 endif
506
507 if(l_tra.gt.MAXBUFFLEN .or.(curpos+l_tra-1).ge.MAXBUFFLEN )then
508 c print*,'unpackdata: '
509 c $ ,'tracker buffer length l_tra ',l_tra
510 c $ ,' exceeds tracker buffer dimensions '
511 c print*,'(packet corrupted)'
512 cc runerror=1
513 runerror=2
514 goto 50
515 endif
516 call dunpacker(l_tra,b_tra,runerror,buffer,length_buffer,curpos)
517 if(runerror.eq.1.or.runerror.eq.-1) then
518 goto 50 !go to end
519 endif
520
521 nqualcosa = (real(l_tra))/13*16
522 xx = b_tra(nqualcosa)
523 if (xx.eq.0) nqualcosa=nqualcosa -1
524
525 18 datalength_dat= nqualcosa
526 11 format(i1,' ',z4)
527
528 call readtrailer(trailer,runerror,buffer,length_buffer,curpos,
529 $ startcrc,stopcrc,crctemp)
530
531 ***************************************************************
532 * TRAILER *
533 ***************************************************************
534
535 pnum_dat=ishft(iand(trailer(1),z'f000'),-12)
536 cmdnum_dat=ishft(iand(trailer(1),z'0f00'),-8)
537 bid1_dat=ishft(iand(trailer(1),z'00c0'),-6)
538 bid2_dat=ishft(iand(trailer(1),z'0030'),-4)
539 bid3_dat=ishft(iand(trailer(1),z'000c'),-2)
540 bid4_dat=iand(trailer(1),z'0003')
541 bid5_dat=ishft(iand(trailer(2),z'c000'),-14)
542 bid6_dat=ishft(iand(trailer(2),z'3000'),-12)
543 bid7_dat=ishft(iand(trailer(2),z'0c00'),-10)
544 alarm_dat=ishft(iand(trailer(2),z'0300'),-8)
545 aswr_dat=ior(ishft(iand(trailer(2),z'00ff'),8)
546 $ ,ishft(iand(trailer(3),z'ff00'),-8))
547 crcdat=iand(trailer(3),z'00ff')
548
549 c$$$ print*,'######################',crcdat,crctemp
550
551
552 if(crcdat.eq.crctemp)then
553 crc_dat=0
554 else
555 crc_dat=1
556 endif
557
558 bid_dat_sum = (bid1_dat + bid2_dat + bid3_dat + bid4_dat +
559 & bid5_dat + bid6_dat + bid7_dat)
560
561 bid_dat = bid_dat_sum/7
562
563 50 return
564 end
565
566 * **********************************************************
567 * * *
568 * * *
569 * * *
570 * * *
571 * * *
572 * **********************************************************
573
574 subroutine initlevel0
575
576 include '../common/commontracker.f'
577 include '../common/level0.f'
578
579 good0=0
580 TOTDATAlength = 0
581
582 do i=1, nviews
583
584 DAQmode(i) = 0
585 DSPnumber(i) = 0
586 eventn(i) = 0
587 nclust(i) = 0
588 cutc(i) = 0
589 cutcl(i) = 0
590 addrcluster(i,1) = 0
591 signcluster(i,1) = 0
592 addrcluster(i,2) = 0
593 signcluster(i,2) = 0
594 addrcluster(i,3) = 0
595 signcluster(i,3) = 0
596 fc(i) = 0
597 compressiontime(i) = 0
598 fl5(i) = 0
599 fl4(i) = 0
600 fl3(i) = 0
601 fl2(i) = 0
602 fl1(i) = 0
603 fl6(i) = 0
604 checksum(i) = 0
605 DATAlength(i) = 0
606 pnum(i)= 0
607 cmdnum(i)= 0
608 bid(i) = 1
609 alarm(i)= 0
610 aswr(i) = 0
611 crc(i)=0
612
613 enddo
614
615
616 return
617 end
618
619 * **********************************************************
620 * * *
621 * * *
622 * * *
623 * * *
624 * * *
625 * **********************************************************
626
627 subroutine fillview(i)
628 c -----------------------------------------------------
629 c fill variables related to view i
630 c which will be stored in the level0 nt-ple
631 c at the end of loop on views
632 c ----------------------------------------------------
633
634 include '../common/commontracker.f'
635 include '../common/level0.f'
636 include '../common/common_readraw.f'
637
638
639 DAQmode(i) = DAQmode_dat
640 DSPnumber(i) = DSPnumber_dat
641 eventn(i) = eventn_dat
642 nclust(i) = nclust_dat
643 cutc(i) = cutc_dat
644 cutcl(i) = cutcl_dat
645 addrcluster(i,1) = addrcluster_dat(1)
646 signcluster(i,1) = signcluster_dat(1)
647 addrcluster(i,2) = addrcluster_dat(2)
648 signcluster(i,2) = signcluster_dat(2)
649 addrcluster(i,3) = addrcluster_dat(3)
650 signcluster(i,3) = signcluster_dat(3)
651 fc(i) = fc_dat
652 compressiontime(i) = compressiontime_dat
653 fl5(i) = fl5_dat
654 fl4(i) = fl4_dat
655 fl3(i) = fl3_dat
656 fl2(i) = fl2_dat
657 fl1(i) = fl1_dat
658 fl6(i) = fl6_dat
659 checksum(i) = checksum_dat
660 DATAlength(i) = datalength_dat
661 crc(i) = crc_dat
662
663 c -----------------------------------------------------------------------
664 c filling TRAILER variables
665 c ----------------------------------------------------------------------
666
667 pnum(i)= pnum_dat
668 cmdnum(i)= cmdnum_dat
669 bid(i) = bid_dat
670 alarm(i)= alarm_dat
671 aswr(i) = aswr_dat
672
673 do idat=1,datalength_dat
674 id = TOTDATAlength + idat
675 datatracker(id) = b_tra(idat)
676 enddo
677 TOTDATAlength = TOTDATAlength + datalength_dat
678
679 return
680 end
681
682 * **********************************************************
683 * * *
684 * * *
685 * * *
686 * * *
687 * * *
688 * **********************************************************
689
690 subroutine fillview_cal(i)
691 c -----------------------------------------------------
692 c fill variables related to view i
693 c which will be stored in the calibration nt-ple
694 c at the end of loop on views
695 c ----------------------------------------------------
696
697 include '../common/commontracker.f'
698 include '../common/trk_calib_parameters.f'
699 include '../common/common_readraw.f'
700
701 DAQmode(i) = DAQmode_cal
702 DSPnumber(i) = DSPnumber_cal
703 calibnumber(i) = calibrationnumber
704 ncalib_event(i)= nused_event
705 ped_l1(i) = ped_1
706 ped_l2(i) = ped_2
707 ped_l3(i) = ped_3
708 sig_l1(i) = sig_1
709 sig_l2(i) = sig_2
710 sig_l3(i) = sig_3
711 nbad_l1(i) = nbad_1
712 nbad_l2(i) = nbad_2
713 nbad_l3(i) = nbad_3
714 cal_flag(i) = ff
715
716 do is=1,nstrips_view
717 DSPbad_par(i,is) = DSPbad_o(DSPnumber_cal,is)
718 DSPped_par(i,is) = DSPped_o(DSPnumber_cal,is)
719 DSPsig_par(i,is) = DSPsig_o(DSPnumber_cal,is)
720 enddo
721
722 crc_hcal(i) = crc_hcalib
723 crc_cal(i,1) = crc_calib(1)
724 crc_cal(i,2) = crc_calib(2)
725 crc_cal(i,3) = crc_calib(3)
726
727 return
728 end
729
730 * **********************************************************
731 * * *
732 * * *
733 * * *
734 * * *
735 * * *
736 * **********************************************************
737
738 subroutine initcalib
739 include '../common/commontracker.f'
740 include '../common/trk_calib_parameters.f'
741
742 good0=0
743
744 do i=1,nplanes
745
746 DAQmode(i) = 0
747 DSPnumber(i) = 0
748 calibnumber(i) = 0
749 ncalib_event(i)= 0
750 ped_l1(i) = 0
751 ped_l2(i) = 0
752 ped_l3(i) = 0
753 sig_l1(i) = 0
754 sig_l2(i) = 0
755 sig_l3(i) = 0
756 nbad_l1(i) = 0
757 nbad_l2(i) = 0
758 nbad_l3(i) = 0
759 cal_flag(i) = 0
760
761 do is=1,nstrips_view
762 DSPbad_par(i,is) = 0
763 DSPped_par(i,is) = 0
764 DSPsig_par(i,is) = 0
765 enddo
766 crc_hcal(i) = 0
767 crc_cal(i,1) = 0
768 crc_cal(i,2) = 0
769 crc_cal(i,3) = 0
770 enddo
771
772 return
773 end

  ViewVC Help
Powered by ViewVC 1.1.23