#include "Digitizer.h"

void Digitizer::DigitizeTOF(int np,float *atte1,float *atte2,float *lambda1,float *lambda2){
//fDataTof: 12 x 23 bytes (=276 bytes)
  UChar_t *pTof=fDataTof;
  Bool_t DEBUG=false;

  Int_t cdp[75] = {0,1,1,0,1,1,0,1,1,0,1,1,0,1,1,  //0-14
                  0,0,0,1,0,1,0,1,1,0,0,1,0,1,0,  //15-29
                  1,1,1,1,2,2,2,3,3,3,3,4,4,4,1,  //30-44
                  1,2,0,2,0,0,5,5,5,5,6,6,6,6,7,  //45-59
                  3,3,4,4,5,5,6,7,8,9,10,11,12,13,14 };  //60-74
  
  int Z = cdp[Ipa-1];       

  float time_res[8] = {425.,210.,170.,130.,120.,120.,120.,120.};
  for(Int_t i=0;i<8;i++)time_res[i]/=1.4;//1.17;1.5;1.3*/
  Float_t dt1 = 0.;// = 1.e-12*time_res[0];  // single PMT resolution for Z=1  (WM, Nov'07)
  
  if ((Z > 1) && (Z < 9)) dt1=1.e-12*time_res[(Z-1)];
  if  (Z > 8) dt1=120.e-12;
  

// ------ evaluate energy in each pmt: ------
// strip geometry (lenght/width)
  Float_t dimel[6] = {33.0, 40.8 ,18.0, 15.0, 15.0, 18.0};
//  S11 8 paddles  33.0 x 5.1 cm
//  S12 6 paddles  40.8 x 5.5 cm
//  S21 2 paddles  18.0 x 7.5 cm
//  S22 2 paddles  15.0 x 9.0 cm
//  S31 3 paddles  15.0 x 6.0 cm
//  S32 3 paddles  18.0 x 5.0 cm
  Float_t FGeo[2]={0., 0.}; /* geometrical factor */
  const Float_t Pho_keV = 10.;     // photons per keV in scintillator
  const Float_t echarge = 1.6e-19; // electron charge
  Float_t Npho=0.;
  Float_t QevePmt_pC[48];
  Float_t QhitPad_pC[2]={0.,0.};
  Float_t QhitPmt_pC[2]={0.,0.};
  Float_t pmGain = 3.5e6;  /* PMT Gain: the same for all PMTs */
  Float_t effi=0.21;       /* Efficienza di fotocatodo */
// pC < 800 
  Float_t ADC_pC0A =-4.437616e+01;
  Float_t ADC_pC1A = 1.573329e+00;
  Float_t ADC_pC2A = 2.780518e-04;
  Float_t ADC_pC3A =-2.302160e-07;
// pC   > 800:
  Float_t ADC_pC0B =-2.245756e+02;
  Float_t ADC_pC1B = 2.184156e+00;
  Float_t ADC_pC2B =-4.171825e-04;
  Float_t ADC_pC3B = 3.789715e-08;

  Float_t pCthres=40.;     // threshold in charge
  Int_t ADClast=4095;      // no signal --> ADC ch=4095
  Int_t ADCsat=3100;       // saturation value for the ADCs
  Int_t ADCtof[48];
  Float_t ScaleFact[48]={0.39, 0.49, 0.38, 0.40, 0.65, 0.51, 0.43, 0.49,
			 0.58, 0.38, 0.53, 0.57, 0.53, 0.45, 0.49, 0.22,
			 0.21, 0.44, 0.28, 0.57, 0.26, 0.72, 0.37, 0.29,
			 0.30, 0.89, 0.37, 0.12, 0.27, 0.23, 0.15, 0.22,
			 0.19, 0.20, 0.21, 0.19, 0.41, 0.32, 0.39, 0.38,
			 0.28, 0.66, 0.28, 0.40, 0.39, 0.40, 0.37, 0.35};//15:0.7--0.95, 16:0.9--1.25, 27:0.9--1.3, 30:0.9--1.15, 32:0.85--1.05, 33:0.85--1.05
  for(Int_t i=0; i<48; i++){
    QevePmt_pC[i] = 0;
    ADCtof[i]=0;
  }
  Int_t ip,ipad,pmtleft=0,pmtright=0;
// TDC variables:
  Int_t TDClast=4095,TDCint[48];
  Float_t  tdc[48],tdc1[48],tdcpmt[48];
  for(Int_t i=0; i<48; i++) {
    tdcpmt[i] = 1000.; 
    tdc[i]  = 0.;            // 18-oct WM
    tdc1[i] = 0.;            // 18-oct WM
  } 
  Float_t thresh=20.; // to be defined better... (Wolfgang)
// === TDC: simulate timing for each paddle
  Float_t tdcres[50],c1_S[50],c2_S[50],c3_S[50]; 
  for(Int_t j=0;j<48;j++){
    tdcres[j] = 50.E-12;   // TDC resolution 50 picosec
    c1_S[j] = 500.;  // cable length in channels
    c2_S[j] = 0.;
    c3_S[j] = 1000.;
    c1_S[j] = c1_S[j]*tdcres[j];   // cable length in sec 
    c2_S[j] = c2_S[j]*tdcres[j];
  }
  /* **********************************  start loop over hits */
  if(Nthtof>*ntof)cout<<"NTHTOF > "<<*ntof<<" , event rejected ! "<<Nthtof<<endl;
  else{
    for(Int_t nh=0; nh<Nthtof; nh++){
      Float_t s_l_g[6] = {8.0, 8.0, 20.9, 22.0, 9.8, 8.3 };  // length of the lightguide
      Float_t t1,t2,veff,veff1,veff0 ;
      veff0 = 100.*1.0e8 ; // light velocity in the scintillator in m/sec
      veff1 = 100.*1.5e8; // light velocity in the lightguide in m/sec
      veff=veff0;         // signal velocity in the paddle
      t1 = Timetof[nh] ;  // Start
      t2 = Timetof[nh] ;
// Donatella: redefinition plane and pad for vectors in C
      ip = Ipltof[nh]-1;
      ipad = Ipaddle[nh]-1;
      pmtleft=0; 
      pmtright=0;
// WM: S12 paddles are "reversed" (Nov'07)
      if (ip==2)
	if (ipad==0)
	  ipad=1;
	else
	  ipad=0;
      if ((ip>-1)&&(ip<6)) {  //ToF paddles only, not S4
	Paddle2Pmt(ip, ipad, &pmtleft, &pmtright);
// DC: evaluates mean position and path inside the paddle
	Float_t tpos=0.;
	Float_t path[2] = {0., 0.};
	//--- Strip in Y = S11,S22,S31 ------
	if(ip==0 || ip==3 || ip==4)
	  tpos = (Yintof[nh]+Youttof[nh])/2.;
	else 
	  if(ip==1 || ip==2 || ip==5)   //--- Strip in X for S12,S21,S32 
	    tpos = (Xintof[nh]+Xouttof[nh])/2.;
	  else //if (ip!=6)
	    printf("*** WARNING TOF: this option should never occur! (ip=%2i, nh=%2i)\n",ip,nh);
	path[0]= tpos + dimel[ip]/2.;   // path to left PMT
	path[1]= dimel[ip]/2.- tpos;    // path to right PMT
	if (DEBUG) {
	  cout <<" plane "<<ip<<" strip # ="<< ipad <<" tpos  "<< tpos <<"\n";
	  cout <<"pmtleft, pmtright "<<pmtleft<<" "<<pmtright<<endl;
	}
// constant geometric factor, the rest is handled by the scaling factor
	FGeo[0] =0.5;
	FGeo[1] =0.5; 
	Npho = Ereltof[nh]*Pho_keV*1.0e6;  // Eloss in GeV 
	
	Float_t knorm[2]={0., 0.}; // Donatella
	Float_t Atten[2]={0., 0.}; // Donatella
	for(Int_t j=0; j<2; j++){
	  QhitPad_pC[j]= Npho*FGeo[j]*effi*pmGain*echarge*1.E12*ScaleFact[pmtleft+j];
	  // WM
	  knorm[j]=atte1[pmtleft+j]*exp(lambda1[pmtleft+j]*dimel[ip]/2.*pow(-1,j+1)) + atte2[pmtleft+j]*exp(lambda2[pmtleft+j]*dimel[ip]/2.*pow(-1,j+1));
	  Atten[j]=atte1[pmtleft+j]*exp(tpos*lambda1[pmtleft+j]) + atte2[pmtleft+j]*exp(tpos*lambda2[pmtleft+j]) ;
	  QhitPmt_pC[j]= QhitPad_pC[j]*Atten[j]/knorm[j];
	  if (DEBUG) {
	    cout<<"pmtleft "<<pmtleft<<" j "<<j<<endl;
	    cout<<" atte1 "<<atte1[pmtleft+j]<<"lambda1 "<<lambda1[pmtleft+j]<<" atte2 "<<atte2[pmtleft+j]<<"lambda2 "<<lambda2[pmtleft+j] <<endl;    
	    cout<<j<<" tpos "<<tpos<<" knorm "<<knorm[j]<<" "<<Atten[j]<<" "<<"QhitPmt_pC "<<QhitPmt_pC[j]<<endl;    
	  }
	}
	if(DEBUG)cout<<"Npho "<<Npho<<" QhitPmt_pC "<<QhitPmt_pC[0]<<" "<<QhitPmt_pC[1]<<endl;   
	QevePmt_pC[pmtleft]  += QhitPmt_pC[0];
	QevePmt_pC[pmtright] += QhitPmt_pC[1];
//TDC
	// WM right and left <->
	t1 = t1 + fabs(path[0]/veff) + s_l_g[ip]/veff1;
	t2 = t2 + fabs(path[1]/veff) + s_l_g[ip]/veff1 ;  // Signal reaches PMT
	t1 = gRandom->Gaus(t1,dt1); //apply gaussian error  dt
	t2 = gRandom->Gaus(t2,dt1); //apply gaussian error  dt
	t1 = t1 + c1_S[pmtleft] ;  // Signal reaches Discriminator ,TDC starts  to run
	t2 = t2 + c1_S[pmtright] ;
// check if signal is above threshold
// then check if tdcpmt is already filled by another hit...
// only re-fill if time is smaller
	if (QhitPmt_pC[0] > thresh) {
	  if (tdcpmt[pmtleft] == 1000.) {  // fill for the first time
	    tdcpmt[pmtleft] = t1;
	    tdc[pmtleft] = t1 + c2_S[pmtleft] ;  // Signal reaches Coincidence
	  }
	  if (tdcpmt[pmtleft] < 1000.) // is already filled!
	    if (t1 <  tdcpmt[pmtleft]) {
	      tdcpmt[pmtleft] = t1;
	      t1 = t1 + c2_S[pmtleft] ;  // Signal reaches Coincidence
	      tdc[pmtleft] = t1;
	    }
	}
	if (QhitPmt_pC[1] > thresh) {
	  if (tdcpmt[pmtright] == 1000.) {  // fill for the first time
	    tdcpmt[pmtright] = t2;
	    tdc[pmtright] = t2 + c2_S[pmtright] ;  // Signal reaches Coincidence
	  }
	  if (tdcpmt[pmtright] < 1000.)  // is already filled!
	    if (t2 <  tdcpmt[pmtright]) {
	      tdcpmt[pmtright] = t2;
	      t2 = t2 + c2_S[pmtright] ;
	      tdc[pmtright] = t2;
	    }
	}
	if(DEBUG)cout<<nh<<" "<<Timetof[nh]<<" "<<t1<<" "<<t2<<endl;
      } // ip > -1  &&  ip < 6
    } // ****************************************       end loop over hits
  } // NTHTOF < 200
// ======  ADC ======
  for(Int_t i=0; i<48; i++){
    if (QevePmt_pC[i] < 800.)  ADCtof[i]= (Int_t)(ADC_pC0A + ADC_pC1A*QevePmt_pC[i] + ADC_pC2A*pow(QevePmt_pC[i],2) + ADC_pC3A*pow(QevePmt_pC[i],3));
    if (QevePmt_pC[i] > 800.)  ADCtof[i]= (Int_t)(ADC_pC0B + ADC_pC1B*QevePmt_pC[i] + ADC_pC2B*pow(QevePmt_pC[i],2) + ADC_pC3B*pow(QevePmt_pC[i],3));
    if (QevePmt_pC[i] > 2485.) ADCtof[i]= (Int_t)(1758. + 0.54*QevePmt_pC[i]);  //assuming a fictional 0.54 ch/pC above ADCsat
    if (ADCtof[i]>ADCsat) ADCtof[i]=ADCsat;
    if (QevePmt_pC[i] < pCthres)  ADCtof[i]= ADClast;
    if (ADCtof[i] < 0) ADCtof[i]=ADClast;    
    if (ADCtof[i] > ADClast) ADCtof[i]=ADClast;
    //if(ADCtof[i]!=4095)cout<<ADCtof[i]<<" ";
    //if((i+1)%4==0)cout<<endl;
  }
  //  cin>>ciao;

// ======  build  TDC coincidence  ======

  Float_t t_coinc = 0;
  Int_t ilast = 100;
  for (Int_t ii=0; ii<48;ii++)
    if (tdc[ii] > t_coinc) {
      t_coinc = tdc[ii];
      ilast = ii;
    }
  
  //     cout<<ilast<<" "<<t_coinc<<endl;
  //     At t_coinc  trigger condition is fulfilled
  
  for (Int_t ii=0; ii<48;ii++){
    //      if (tdc[ii] != 0) tdc1[ii] = t_coinc - tdc[ii];   // test 1
    if (tdc[ii] != 0) tdc1[ii] = t_coinc - tdcpmt[ii];  // test 2
    tdc1[ii] = tdc1[ii]/tdcres[ii];                     // divide by TDC resolution 
    if (tdc[ii] != 0) tdc1[ii] = tdc1[ii] + c3_S[ii];  // add cable length c3
  } // missing parenthesis inserted! (Silvio)

  for(Int_t i=0; i<48; i++){
    if(tdc1[i] != 0.){
      TDCint[i]=(Int_t)tdc1[i];
      if (TDCint[i]>4093) TDCint[i]=TDClast;  // 18-oct WM
      if (DEBUG)cout<<i<<" "<<TDCint[i]<<endl;
    } else
      TDCint[i]= TDClast;
  }
  if (DEBUG)cout<<"-----------"<<endl;
   //------ use channelmap for ToF: 18-oct WM
  Int_t  channelmap[] =  {3,21,11,29,19,45,27,37,36,28,44,20,5,12,13,4,
			  6,47,14,39,22,31,30,23,38,15,46,7,0,33,16,24,
			  8,41,32,40,25,17,34,9,42,1,2,10,18,26,35,43};
  Int_t ADChelp[48],TDChelp[48];
  for(Int_t i=0; i<48; i++){
    Int_t ii=channelmap[i];
    ADChelp[ii]= ADCtof[i];
    TDChelp[ii]= TDCint[i];
  }
  for(Int_t i=0; i<48; i++){
    ADCtof[i]= ADChelp[i];
    TDCint[i]= TDChelp[i];
  }
// ======  write fDataTof  =======
  UChar_t Ctrl3bit[8]={32,0,96,64,160,128,224,192};  // DC (msb in 8 bit word )
  UChar_t tofBin;
  for (Int_t j=0; j < 12; j++){   // loop on TDC #12
    Int_t j12=j*23;               // for each TDC 23 bytes (8 bits)
    fDataTof[j12+0]=0x00;   // TDC_ID
    fDataTof[j12+1]=0x00;   // EV_COUNT
    fDataTof[j12+2]=0x00;   // TDC_MASK (1)
    fDataTof[j12+3]=0x00;   // TDC_MASK (2)
    for (Int_t k=0; k < 4; k++){   // for each TDC 4 channels (ADC+TDC)
      Int_t jk12=j12+4*k;         // ADC,TDC channel (0-47)
      tofBin =(UChar_t)(ADCtof[k+4*j]/256);   // ADC# (msb) 
      fDataTof[jk12+4] = Bin2GrayTof(tofBin,fDataTof[jk12+4]);
/* control bits inserted here, after the bin to gray conv - DC*/ 
      fDataTof[jk12+4] = Ctrl3bit[2*k] | fDataTof[jk12+4];
      tofBin=(UChar_t)(ADCtof[k+4*j]%256);   // ADC# (lsb)
      fDataTof[jk12+5] = Bin2GrayTof(tofBin,fDataTof[jk12+5]);
      tofBin=(UChar_t)(TDCint[k+4*j]/256);   // TDC# (msb)
      fDataTof[jk12+6]=Bin2GrayTof(tofBin,fDataTof[jk12+6]);
/* control bits inserted here, after the bin to gray conv - DC*/ 
      fDataTof[jk12+6] = Ctrl3bit[2*k+1] | fDataTof[jk12+6];
      tofBin=(UChar_t)(TDCint[k+4*j]%256);   // TDC# (lsb)
      fDataTof[jk12+7]=Bin2GrayTof(tofBin,fDataTof[jk12+7]);
    }
    fDataTof[j12+20]=0x00;   // TEMP1
    fDataTof[j12+21]=0x00;   // TEMP2
    fDataTof[j12+22]= EvaluateCrcTof(pTof);   // CRC
    pTof+=23;
  }
  // ======  evaluate trigger variables  =======
  //fDataTrigger: 152 bytes  (corrected 30/11/'07 SO - it was 153)
  // initialization:
  for (Int_t j=0; j < 152; j++)fDataTrigger[j]=0x00;
  UChar_t *pTrg=fDataTrigger;
  // Only the variables with a (*) are modified; the others are set to 0
  // info given in #bites data + #bites crc
  // TB_READ_PMT_PLANE      :  6 + 1
  // TB_READ_EVENT_COUNT    :  3 + 1 (*)
  // TB_READ_TRIGGER_RATE   : 12 + 1
  // TB_READ_D_L_TIME       :  4 + 1
  // TB_READ_S4_CAL_COUNT   :  4 + 1
  // TB_READ_PMT_COUNT1     : 48 + 1
  // TB_READ_PMT_COUNT2     : 48 + 1
  // TB_READ_PATTERN_BUSY   :  8 + 1
  // TB_READ_PATTERN_TRIGGER:  7 + 1 (*)
  // TB_READ_TRIGGER_CONF   :  2 + 1 (*)

  // TB_READ_EVENT_COUNT
  fhBookTree->SetBranchStatus("Ievnt",&Ievnt);
  UInt_t cTrg  = (UInt_t)Ievnt;  //counter
  UInt_t cTrg2 = 0;  //counter with bits inverted, according to document 
                     //"formato dati provenienti dalla trigger board"
  for (Int_t i=0; i < 24; i++){  // Use the first 24 bits
    if (cTrg & (0x1 << i) )
      cTrg2 = cTrg2 | (0x1 << (24-i));
  }
  fDataTrigger[7] = (UChar_t)(cTrg2 >> 16); // 8 MSbits (out  of 24)
  fDataTrigger[8] = (UChar_t)(cTrg2 >> 8);  // 8 "middle" bits
  fDataTrigger[9] = (UChar_t)(cTrg2);       // 8 LSbits
  pTrg=fDataTrigger+7;
  fDataTrigger[10]=EvaluateCrcTrigger(pTrg, 3);
  
  // TB_READ_PATTERN_TRIGGER: bytes 141-148:
  // PatternTrigMap[i] corresponds to bit i in TB_READ_PATTERN_TRIGGER:
  // mapping according to documents:
  // 1. "formato dati provenienti dalla trigger board"
  // 2. "The ToF quicklook software", Appendix A (Campana, Nagni)
  Int_t PatternTrigMap[]={29,42,43,1,16,7,17,28,33,41,46,2,15,8,18,27,
			  30,40,44,3,14,9,19,26,32,37,47,4,13,10,20,25,
			  34,31,38,45,5,12,21,24,36,35,39,48,6,11,22,23};
  for (Int_t i=0; i < 48; i++)
    //if (ADCtof[i]>thrTrg)
    if (tdc1[channelmap[i]]!=0)
      fDataTrigger[147-(Int_t)((PatternTrigMap[i]+1)/8)]=fDataTrigger[147-(Int_t)((PatternTrigMap[i]+1)/8)] | (0x1 << (PatternTrigMap[i]%8));
  pTrg=fDataTrigger+141;
  fDataTrigger[148]=EvaluateCrcTrigger(pTrg, 7);
  
  // TB_READ_TRIGGER_CONF   : set always acq.mode TOF4
  //
  // TOF1: S1-S2-S3 (&,|)
  // TOF4: S2-S3 (&,&)
  fDataTrigger[149]=0x02;
  fDataTrigger[150]=0x0;
  pTrg=fDataTrigger+149;
  fDataTrigger[151]=EvaluateCrcTrigger(pTrg, 2);
}


UChar_t Digitizer::Bin2GrayTof(UChar_t binaTOF,UChar_t grayTOF){
  union graytof_data {
    UChar_t word;
    struct bit_field {
      unsigned b0:1;
      unsigned b1:1;
      unsigned b2:1;
      unsigned b3:1;
      unsigned b4:1;
      unsigned b5:1;
      unsigned b6:1;
      unsigned b7:1;
    } bit;
  } bi,gr;
  //
  bi.word = binaTOF;
  gr.word = grayTOF;
  // 
  gr.bit.b0 = bi.bit.b1 ^ bi.bit.b0;
  gr.bit.b1 = bi.bit.b2 ^ bi.bit.b1;
  gr.bit.b2 = bi.bit.b3 ^ bi.bit.b2;
  gr.bit.b3 = bi.bit.b3;
  //
  /* bin to gray conversion 4 bit per time*/
  //
  gr.bit.b4 = bi.bit.b5 ^ bi.bit.b4;
  gr.bit.b5 = bi.bit.b6 ^ bi.bit.b5;
  gr.bit.b6 = bi.bit.b7 ^ bi.bit.b6;
  gr.bit.b7 = bi.bit.b7;
  //
  return(gr.word); 
}

UChar_t Digitizer::EvaluateCrcTof(UChar_t *pTof) {
  Bool_t DEBUG=false;
  if (DEBUG)
    return(0x00);

  UChar_t crcTof=0x00;
  UChar_t *pc=&crcTof, *pc2;
  pc2=pTof;
  for (Int_t jp=0; jp < 23; jp++){
    //crcTof = crc8(...)
    Crc8Tof(pc2++,pc);
    //    printf("%2i --- %x\n",jp,crcTof);
  }
  return(crcTof);
}

UChar_t Digitizer::EvaluateCrcTrigger(UChar_t *pTrg, Int_t nb) {
  Bool_t DEBUG=false;
  if (DEBUG)
    return(0x00);

  UChar_t crcTrg=0x00;
  UChar_t *pc=&crcTrg, *pc2;
  pc2=pTrg;
  for (Int_t jp=0; jp < nb; jp++)
    Crc8Tof(pc2++,pc);
  return(crcTrg);
}

void Digitizer::Crc8Tof(UChar_t *oldCRC, UChar_t *crcTof){
  union crctof_data {
    UChar_t word;
    struct bit_field {
      unsigned b0:1;
      unsigned b1:1;
      unsigned b2:1;
      unsigned b3:1;
      unsigned b4:1;
      unsigned b5:1;
      unsigned b6:1;
      unsigned b7:1;
    } bit;
  } c,d,r;

  c.word = *oldCRC;
  //d.word = *newCRC;
  d.word = *crcTof;
  r.word = 0;

  r.bit.b0 = c.bit.b7 ^ c.bit.b6 ^ c.bit.b0 ^ 
             d.bit.b0 ^ d.bit.b6 ^ d.bit.b7;

  r.bit.b1 = c.bit.b6 ^ c.bit.b1 ^ c.bit.b0 ^ 
             d.bit.b0 ^ d.bit.b1 ^ d.bit.b6;

  r.bit.b2 = c.bit.b6 ^ c.bit.b2 ^ c.bit.b1 ^ c.bit.b0 ^
             d.bit.b0 ^ d.bit.b1 ^ d.bit.b2 ^ d.bit.b6;

  r.bit.b3 = c.bit.b7 ^ c.bit.b3 ^ c.bit.b2 ^ c.bit.b1 ^ 
             d.bit.b1 ^ d.bit.b2 ^ d.bit.b3 ^ d.bit.b7;

  r.bit.b4 = c.bit.b4 ^ c.bit.b3 ^ c.bit.b2 ^
             d.bit.b2 ^ d.bit.b3 ^ d.bit.b4;

  r.bit.b5 = c.bit.b5 ^ c.bit.b4 ^ c.bit.b3 ^
             d.bit.b3 ^ d.bit.b4 ^ d.bit.b5;

  r.bit.b6 = c.bit.b6 ^ c.bit.b5 ^ c.bit.b4 ^ 
             d.bit.b4 ^ d.bit.b5 ^ d.bit.b6;

  r.bit.b7 = c.bit.b7 ^ c.bit.b6 ^ c.bit.b5 ^ 
             d.bit.b5 ^ d.bit.b6 ^ d.bit.b7 ;

  *crcTof=r.word;
  //return r.word; 
};

void Digitizer::Paddle2Pmt(Int_t plane, Int_t paddle, Int_t *pl, Int_t *pr){
  //* @param plane    (0 - 5)
  //* @param paddle   (plane=0, paddle = 0,...5)
  //* @param padid    (0 - 23)  
  //
  Int_t padid=-1;
  Int_t pads[6]={8,6,2,2,3,3};
  //
  Int_t somma=0;
  Int_t np=plane;
  for(Int_t j=0; j<np; j++)somma+=pads[j];
  padid=paddle+somma;
  *pl = padid*2;
  //  *pr = *pr + 1; 
  *pr = *pl + 1; // WM
};

void Digitizer::LoadTOFCalib(int np,float *atte1,float *atte2,float *lambda1,float *lambda2){
  stringstream calfile;
  Int_t error = 0,temp=0;
  GL_PARAM *glparam = new GL_PARAM();
  error = glparam->Query_GL_PARAM(3,202,fDbc);
  calfile.str("");
  calfile << glparam->PATH.Data() << "/";
  calfile << glparam->NAME.Data();
  printf("\n Using TOF calibration file: \n %s\n",calfile.str().c_str());
  ifstream fileTriggerCalib;
  fileTriggerCalib.open(calfile.str().c_str());
  if(!fileTriggerCalib)printf("debug: no trigger calib file!\n");
  // correct readout WM Oct '07
  for(Int_t i=0; i<np; i++){
    fileTriggerCalib >> temp;
    fileTriggerCalib >> atte1[i];
    fileTriggerCalib >> lambda1[i];
    fileTriggerCalib >> atte2[i];
    fileTriggerCalib >> lambda2[i];
    fileTriggerCalib >> temp;
  }
  fileTriggerCalib.close();
  //end tof calib
}