| 1 |
# |
| 2 |
# ************ PamCut makefile ************ |
| 3 |
# |
| 4 |
# Author: Nicola Mori |
| 5 |
# |
| 6 |
# This makefile will produce a cut library libPamCut.so. In the "Build options" |
| 7 |
# section the various compilation options can be set; they will propagate to the |
| 8 |
# whole project. |
| 9 |
# |
| 10 |
|
| 11 |
|
| 12 |
# ------------------------------- Build options ----------------------------# |
| 13 |
# |
| 14 |
# Normally you will not have the necessity to modify what lies below, if you |
| 15 |
# correctly specified the names for the submakefiles in include.mk. Modify |
| 16 |
# the options below to set optimization flags, compiler name and so on. |
| 17 |
# |
| 18 |
|
| 19 |
# C++ compiler and linker |
| 20 |
C++ = g++ |
| 21 |
|
| 22 |
# Optimization flags. |
| 23 |
# 1) Use -O, -O1, -O2, -O3 to optimize for speed or -g, -g1, -g2, -g3 |
| 24 |
# for debugging (slower execution). |
| 25 |
# 2) Uncomment -DDEBUGPAMCUT to enable debug sections in the .cpp code (these sections must be included between |
| 26 |
# "#ifdef DEBUGPAMCUT" and "#endif"). Note that if you |
| 27 |
# use debug instructions also in the .h code (headers) you will also have to add -DDEBUGPAMCUT |
| 28 |
# to the compiler options for the main analysis program. |
| 29 |
# 3) Since this is a general compiler flag it can also be used, eg., to set the -m32 flag |
| 30 |
OPTIMIZE = -O3 ${PAM_BIT} #-DDEBUGPAMCUT |
| 31 |
|
| 32 |
# Linker flags |
| 33 |
# The flags defined here will be directly inserted into the linker invocation. Place here the |
| 34 |
# -m32 flag, for example. |
| 35 |
LINKERFLAGS = ${PAM_BIT} |
| 36 |
|
| 37 |
# Library flags |
| 38 |
# Pamela software is modular, so some libraries may not be available in some istallations. |
| 39 |
# To avoid linking problems, here you can define flags to exclude those parts of the |
| 40 |
# PamCut software which make use of unavailable libraries. Remember to place |
| 41 |
# the code to be excluded between proper preprocessor directives. See the documentation or the cut |
| 42 |
# TofNucleiZCut for an example. |
| 43 |
# Since PamCut headers may refer to the optional libraries, it's important to define the same |
| 44 |
# flags when compiling the analysis code. Otherwise, analysis code will include PamCut headers which, |
| 45 |
# if no exclusion flag is set, will try to include optional software headers. |
| 46 |
# Conversely, if you use optional libraries remember to tell it to the linker. |
| 47 |
# |
| 48 |
# Excluded cuts and actions: |
| 49 |
# NO_CALONUCLEI: CaloNucleiZCut |
| 50 |
# NO_TRKNUCLEI: TrkNucleiZCut |
| 51 |
# NO_TOFNUCLEI: TofNucleiZCut |
| 52 |
# NO_CALOPRESAMPLER: ReprocessCaloAction |
| 53 |
# NO_CALOAXIS: CaloAngleCut, CaloCrossCut, CaloGeomCut, CaloGeomYSensCut, CaloIonCut, CaloNHitCut, |
| 54 |
# CaloNotIntCut (reduced functionality), CaloTrackChi2Cut, CaloTrackCut, |
| 55 |
# TrackRedGeomCut (reduced functionality), CaloChi2HistoAction, CaloAxisChi2VsRigHistoAction |
| 56 |
EXCLUSIONFLAGS = -DNO_CALONUCLEI -DNO_TRKNUCLEI -DNO_TOFNUCLEI -DNO_CALOPRESAMPLER -DNO_CALOAXIS |
| 57 |
|
| 58 |
# Put below the files on which every .cpp must depend on, ie., those files that, |
| 59 |
# if modified, will trigger a complete recompilation of the project. |
| 60 |
COMMONDEPS = makefile |
| 61 |
|
| 62 |
# The file include.mk contains the inclusion of all the sub-makefiles (subdir.mk) |
| 63 |
# in the project. Includes for new cuts must be added there and not below... |
| 64 |
-include include.mk |
| 65 |
|
| 66 |
#-------------------------------- Make body --------------------------------# |
| 67 |
# |
| 68 |
# Below the make commands are defined. There are no options to set in this section, |
| 69 |
# so it has to be modified only in case of radical changes to the make procedure. |
| 70 |
|
| 71 |
# Remove command for clean |
| 72 |
RM := rm -rf |
| 73 |
|
| 74 |
# Additional dependencies from headers of other software (PAMELA, ROOT) |
| 75 |
ifneq ($(MAKECMDGOALS),clean) |
| 76 |
ifneq ($(strip $(CPP_DEPS)),) |
| 77 |
-include $(CPP_DEPS) |
| 78 |
endif |
| 79 |
endif |
| 80 |
|
| 81 |
# All Target |
| 82 |
all: libPamCut.so |
| 83 |
@echo |
| 84 |
@echo "**** Compiler version and compilation host ****" |
| 85 |
@$(C++) --version | grep GCC |
| 86 |
@hostname |
| 87 |
@echo "**** Compilation flags ****" |
| 88 |
@echo OPTIMIZE: $(OPTIMIZE) |
| 89 |
@echo LINKERFLAGS: $(LINKERFLAGS) |
| 90 |
@echo EXCLUSIONFLAGS: $(EXCLUSIONFLAGS) |
| 91 |
@echo |
| 92 |
|
| 93 |
# Tool invocations |
| 94 |
libPamCut.so: $(OBJS) $(USER_OBJS) |
| 95 |
@echo 'Building target: $@' |
| 96 |
@echo 'Invoking: GCC C++ Linker' |
| 97 |
$(C++) -shared $(LINKERFLAGS) -o"libPamCut.so" $(OBJS) |
| 98 |
@echo 'Finished building target: $@' |
| 99 |
@echo ' ' |
| 100 |
|
| 101 |
# Other Targets |
| 102 |
clean: |
| 103 |
-$(RM) $(CPP_DEPS) $(OBJS) libPamCut.so |
| 104 |
-@echo ' ' |
| 105 |
|
| 106 |
distclean: |
| 107 |
@rm -f ${PAM_LIB}/libPamCut.so |
| 108 |
@rm -rf ${PAM_INC}/PamCut |
| 109 |
@echo Installed files successfully removed. |
| 110 |
|
| 111 |
install: |
| 112 |
@if [[ "${PAM_INC}" == "" || "${PAM_LIB}" == "" ]]; then \ |
| 113 |
echo Pamela environment not set. ; \ |
| 114 |
else \ |
| 115 |
rootdir=`pwd`; \ |
| 116 |
for file in `find -name "*.h"`; do \ |
| 117 |
dir=`dirname $${file} | sed 's/.\///'`; \ |
| 118 |
mkdir -p ${PAM_INC}/PamCut/$${dir}; \ |
| 119 |
cp -u $${file} ${PAM_INC}/PamCut/$${dir}; \ |
| 120 |
done; \ |
| 121 |
cp -u libPamCut.so ${PAM_LIB}; \ |
| 122 |
fi |
| 123 |
@echo PamCut installed. |
| 124 |
|
| 125 |
.PHONY: all clean distclean install |
| 126 |
|
Parent Directory
| 
Revision Log