Contents of /PamCut/makefile

#
#   ************ PamCut makefile ************
#    
#     Author: Nicola Mori
#   
#               This makefile will produce a cut library libPamCut.so. In the "Build options"
#       section the various compilation options can be set; they will propagate to the
#       whole project.
#    


# ------------------------------- Build options ----------------------------#
#
# Normally you will not have the necessity to modify what lies below, if you
# correctly specified the names for the submakefiles in include.mk. Modify
# the options below to set optimization flags, compiler name and so on. 
#

# C++ compiler and linker
C++ = g++

# Optimization flags.
# 1) Use -O, -O1, -O2, -O3 to optimize for speed or -g, -g1, -g2, -g3
# for debugging (slower execution).
# 2) Uncomment -DDEBUGPAMCUT to enable debug sections in the .cpp code (these sections must be included between
# "#ifdef DEBUGPAMCUT" and "#endif"). Note that if you
# use debug instructions also in the .h code (headers) you will also have to add -DDEBUGPAMCUT
# to the compiler options for the main analysis program.
OPTIMIZE = -g3 #-DDEBUGPAMCUT


# Library flags
# Pamela software is modular, so some libraries may not be available in some istallations.
# To avoid linking problems, here you can define flags to exclude those parts of the
# PamCut software which make use of unavailable libraries. Remember to place
# the code to be excluded between proper preprocessor directives. See the documentation or the cut
# TofNucleiZCut for an example.
# Since PamCut headers may refer to the optional libraries, it's important to define the same 
# flags when compiling the analysis code. Otherwise, analysis code will include PamCut headers which,
# if no exclusion flag is set, will try to include optional software headers.
# Conversely, if you use optional libraries remember to tell it to the linker. 

EXCLUSIONFLAGS = -DNO_CALONUCLEI -DNO_TRKNUCLEI -DNO_TOFNUCLEI

# Put below the files on which every .cpp  must depend on, ie., those files that,
# if modified, will trigger a complete recompilation of the project. 
COMMONDEPS = makefile

# The file include.mk contains the inclusion of all the sub-makefiles (subdir.mk)
# in the project. Includes for new cuts must be added there and not below... 
-include include.mk

#-------------------------------- Make body --------------------------------#
#
# Below the make commands are defined. There are no options to set in this section,
# so it has to be modified only in case of radical changes to the make procedure.

# Remove command for clean
RM := rm -rf

# Additional dependencies from headers of other software (PAMELA, ROOT)
ifneq ($(MAKECMDGOALS),clean)
ifneq ($(strip $(CPP_DEPS)),)
-include $(CPP_DEPS)
endif
endif

# All Target
all: libPamCut.so
        @echo
        @echo "**** Compiler version and compilation host ****"
        @$(C++) --version | grep GCC
        @hostname
        @echo
        
# Tool invocations
libPamCut.so: $(OBJS) $(USER_OBJS)
        @echo 'Building target: $@'
        @echo 'Invoking: GCC C++ Linker'
        $(C++) -shared -o"libPamCut.so" $(OBJS)
        @echo 'Finished building target: $@'
        @echo ' '

# Other Targets
clean:
        -$(RM) $(CPP_DEPS) $(OBJS) libPamCut.so
        -@echo ' '

distclean:
        @rm -f ${PAM_LIB}/libPamCut.so
        @rm -rf ${PAM_INC}/PamCut
        @echo Installed files successfully removed. 
        
install:
        @if [[ "${PAM_INC}" == ""  || "${PAM_LIB}" == "" ]]; then \
            echo Pamela environment not set. ; \
        else \
          rootdir=`pwd`; \
          for file in `find -name "*.h"`; do \
                dir=`dirname $${file} | sed 's/.\///'`; \
                mkdir -p ${PAM_INC}/PamCut/$${dir}; \
            cp -u $${file} ${PAM_INC}/PamCut/$${dir}; \
          done; \
          cp -u libPamCut.so ${PAM_LIB}; \
        fi
        @echo PamCut installed.

.PHONY: all clean distclean install

1	#
2	# ********** PamCut makefile **********
3	#
4	# Author: Nicola Mori
5	#
6	# This makefile will produce a cut library libPamCut.so. In the "Build options"
7	# section the various compilation options can be set; they will propagate to the
8	# whole project.
9	#
10
11
12	# ------------------------------- Build options ----------------------------#
13	#
14	# Normally you will not have the necessity to modify what lies below, if you
15	# correctly specified the names for the submakefiles in include.mk. Modify
16	# the options below to set optimization flags, compiler name and so on.
17	#
18
19	# C++ compiler and linker
20	C++ = g++
21
22	# Optimization flags.
23	# 1) Use -O, -O1, -O2, -O3 to optimize for speed or -g, -g1, -g2, -g3
24	# for debugging (slower execution).
25	# 2) Uncomment -DDEBUGPAMCUT to enable debug sections in the .cpp code (these sections must be included between
26	# "#ifdef DEBUGPAMCUT" and "#endif"). Note that if you
27	# use debug instructions also in the .h code (headers) you will also have to add -DDEBUGPAMCUT
28	# to the compiler options for the main analysis program.
29	OPTIMIZE = -g3 #-DDEBUGPAMCUT
30
31
32	# Library flags
33	# Pamela software is modular, so some libraries may not be available in some istallations.
34	# To avoid linking problems, here you can define flags to exclude those parts of the
35	# PamCut software which make use of unavailable libraries. Remember to place
36	# the code to be excluded between proper preprocessor directives. See the documentation or the cut
37	# TofNucleiZCut for an example.
38	# Since PamCut headers may refer to the optional libraries, it's important to define the same
39	# flags when compiling the analysis code. Otherwise, analysis code will include PamCut headers which,
40	# if no exclusion flag is set, will try to include optional software headers.
41	# Conversely, if you use optional libraries remember to tell it to the linker.
42
43	EXCLUSIONFLAGS = -DNO_CALONUCLEI -DNO_TRKNUCLEI -DNO_TOFNUCLEI
44
45	# Put below the files on which every .cpp must depend on, ie., those files that,
46	# if modified, will trigger a complete recompilation of the project.
47	COMMONDEPS = makefile
48
49	# The file include.mk contains the inclusion of all the sub-makefiles (subdir.mk)
50	# in the project. Includes for new cuts must be added there and not below...
51	-include include.mk
52
53	#-------------------------------- Make body --------------------------------#
54	#
55	# Below the make commands are defined. There are no options to set in this section,
56	# so it has to be modified only in case of radical changes to the make procedure.
57
58	# Remove command for clean
59	RM := rm -rf
60
61	# Additional dependencies from headers of other software (PAMELA, ROOT)
62	ifneq ($(MAKECMDGOALS),clean)
63	ifneq ($(strip $(CPP_DEPS)),)
64	-include $(CPP_DEPS)
65	endif
66	endif
67
68	# All Target
69	all: libPamCut.so
70	@echo
71	@echo "** Compiler version and compilation host **"
72	@$(C++) --version \| grep GCC
73	@hostname
74	@echo
75
76	# Tool invocations
77	libPamCut.so: $(OBJS) $(USER_OBJS)
78	@echo 'Building target: $@'
79	@echo 'Invoking: GCC C++ Linker'
80	$(C++) -shared -o"libPamCut.so" $(OBJS)
81	@echo 'Finished building target: $@'
82	@echo ' '
83
84	# Other Targets
85	clean:
86	-$(RM) $(CPP_DEPS) $(OBJS) libPamCut.so
87	-@echo ' '
88
89	distclean:
90	@rm -f ${PAM_LIB}/libPamCut.so
91	@rm -rf ${PAM_INC}/PamCut
92	@echo Installed files successfully removed.
93
94	install:
95	@if [[ "${PAM_INC}" == "" \|\| "${PAM_LIB}" == "" ]]; then \
96	echo Pamela environment not set. ; \
97	else \
98	rootdir=`pwd`; \
99	for file in `find -name "*.h"`; do \
100	dir=`dirname $${file} \| sed 's/.\///'`; \
101	mkdir -p ${PAM_INC}/PamCut/$${dir}; \
102	cp -u $${file} ${PAM_INC}/PamCut/$${dir}; \
103	done; \
104	cp -u libPamCut.so ${PAM_LIB}; \
105	fi
106	@echo PamCut installed.
107
108	.PHONY: all clean distclean install
109