Annotation of /PamCut/makefile

#
#   ************ PamCut makefile ************
#    
#     Author: Nicola Mori
#   
#               This makefile will produce a cut library libPamCut.so. In the "Build options"
#       section the various compilation options can be set; they will propagate to the
#       whole project.
#    


# ------------------------------- Build options ----------------------------#
#
# Normally you will not have the necessity to modify what lies below, if you
# correctly specified the names for the submakefiles in include.mk. Modify
# the options below to set optimization flags, compiler name and so on. 
#

# C++ compiler and linker
C++ = g++

# Optimization flags.
# 1) Use -O, -O1, -O2, -O3 to optimize for speed or -g, -g1, -g2, -g3
# for debugging (slower execution).
# 2) Uncomment -DDEBUGPAMCUT to enable debug sections in the .cpp code (these sections must be included between
# "#ifdef DEBUGPAMCUT" and "#endif"). Note that if you
# use debug instructions also in the .h code (headers) you will also have to add -DDEBUGPAMCUT
# to the compiler options for the main analysis program.
# 3) Since this is a general compiler flag it can also be used, eg., to set the -m32 flag
OPTIMIZE = -g3 #-DDEBUGPAMCUT

# Linker flags
# The flags defined here will be directly inserted into the linker invocation. Place here the
# -m32 flag, for example.
LINKERFLAGS = 

# Library flags
# Pamela software is modular, so some libraries may not be available in some istallations.
# To avoid linking problems, here you can define flags to exclude those parts of the
# PamCut software which make use of unavailable libraries. Remember to place
# the code to be excluded between proper preprocessor directives. See the documentation or the cut
# TofNucleiZCut for an example.
# Since PamCut headers may refer to the optional libraries, it's important to define the same 
# flags when compiling the analysis code. Otherwise, analysis code will include PamCut headers which,
# if no exclusion flag is set, will try to include optional software headers.
# Conversely, if you use optional libraries remember to tell it to the linker.
# 
# Excluded cuts and actions:
# DNO_CALONUCLEI: CaloNucleiZCut
# NO_TRKNUCLEI: TrkNucleiZCut
# NO_TOFNUCLEI: TofNucleiZCut
# NO_CALOPRESAMPLER: ReprocessCaloAction

EXCLUSIONFLAGS = -DNO_CALONUCLEI -DNO_TRKNUCLEI -DNO_TOFNUCLEI #-DNO_CALOPRESAMPLER

# Put below the files on which every .cpp  must depend on, ie., those files that,
# if modified, will trigger a complete recompilation of the project. 
COMMONDEPS = makefile

# The file include.mk contains the inclusion of all the sub-makefiles (subdir.mk)
# in the project. Includes for new cuts must be added there and not below... 
-include include.mk

#-------------------------------- Make body --------------------------------#
#
# Below the make commands are defined. There are no options to set in this section,
# so it has to be modified only in case of radical changes to the make procedure.

# Remove command for clean
RM := rm -rf

# Additional dependencies from headers of other software (PAMELA, ROOT)
ifneq ($(MAKECMDGOALS),clean)
ifneq ($(strip $(CPP_DEPS)),)
-include $(CPP_DEPS)
endif
endif

# All Target
all: libPamCut.so
        @echo
        @echo "**** Compiler version and compilation host ****"
        @$(C++) --version | grep GCC
        @hostname
        @echo
        
# Tool invocations
libPamCut.so: $(OBJS) $(USER_OBJS)
        @echo 'Building target: $@'
        @echo 'Invoking: GCC C++ Linker'
        $(C++) -shared $(LINKERFLAGS) -o"libPamCut.so" $(OBJS)
        @echo 'Finished building target: $@'
        @echo ' '

# Other Targets
clean:
        -$(RM) $(CPP_DEPS) $(OBJS) libPamCut.so
        -@echo ' '

distclean:
        @rm -f ${PAM_LIB}/libPamCut.so
        @rm -rf ${PAM_INC}/PamCut
        @echo Installed files successfully removed. 
        
install:
        @if [[ "${PAM_INC}" == ""  || "${PAM_LIB}" == "" ]]; then \
            echo Pamela environment not set. ; \
        else \
          rootdir=`pwd`; \
          for file in `find -name "*.h"`; do \
                dir=`dirname $${file} | sed 's/.\///'`; \
                mkdir -p ${PAM_INC}/PamCut/$${dir}; \
            cp -u $${file} ${PAM_INC}/PamCut/$${dir}; \
          done; \
          cp -u libPamCut.so ${PAM_LIB}; \
        fi
        @echo PamCut installed.

.PHONY: all clean distclean install

1	pam-fi	1.1	#
2			# ********** PamCut makefile **********
3			#
4			# Author: Nicola Mori
5			#
6			# This makefile will produce a cut library libPamCut.so. In the "Build options"
7			# section the various compilation options can be set; they will propagate to the
8			# whole project.
9			#
10
11
12			# ------------------------------- Build options ----------------------------#
13			#
14			# Normally you will not have the necessity to modify what lies below, if you
15			# correctly specified the names for the submakefiles in include.mk. Modify
16			# the options below to set optimization flags, compiler name and so on.
17			#
18
19			# C++ compiler and linker
20			C++ = g++
21
22			# Optimization flags.
23			# 1) Use -O, -O1, -O2, -O3 to optimize for speed or -g, -g1, -g2, -g3
24			# for debugging (slower execution).
25			# 2) Uncomment -DDEBUGPAMCUT to enable debug sections in the .cpp code (these sections must be included between
26			# "#ifdef DEBUGPAMCUT" and "#endif"). Note that if you
27			# use debug instructions also in the .h code (headers) you will also have to add -DDEBUGPAMCUT
28			# to the compiler options for the main analysis program.
29	pam-fi	1.7	# 3) Since this is a general compiler flag it can also be used, eg., to set the -m32 flag
30	pam-fi	1.1	OPTIMIZE = -g3 #-DDEBUGPAMCUT
31
32	pam-fi	1.7	# Linker flags
33			# The flags defined here will be directly inserted into the linker invocation. Place here the
34			# -m32 flag, for example.
35			LINKERFLAGS =
36	pam-fi	1.4
37	pam-fi	1.1	# Library flags
38			# Pamela software is modular, so some libraries may not be available in some istallations.
39			# To avoid linking problems, here you can define flags to exclude those parts of the
40			# PamCut software which make use of unavailable libraries. Remember to place
41			# the code to be excluded between proper preprocessor directives. See the documentation or the cut
42			# TofNucleiZCut for an example.
43	pam-fi	1.6	# Since PamCut headers may refer to the optional libraries, it's important to define the same
44			# flags when compiling the analysis code. Otherwise, analysis code will include PamCut headers which,
45			# if no exclusion flag is set, will try to include optional software headers.
46	pam-fi	1.9	# Conversely, if you use optional libraries remember to tell it to the linker.
47			#
48			# Excluded cuts and actions:
49			# DNO_CALONUCLEI: CaloNucleiZCut
50			# NO_TRKNUCLEI: TrkNucleiZCut
51			# NO_TOFNUCLEI: TofNucleiZCut
52			# NO_CALOPRESAMPLER: ReprocessCaloAction
53	pam-fi	1.1
54	pam-fi	1.8	EXCLUSIONFLAGS = -DNO_CALONUCLEI -DNO_TRKNUCLEI -DNO_TOFNUCLEI #-DNO_CALOPRESAMPLER
55	pam-fi	1.1
56			# Put below the files on which every .cpp must depend on, ie., those files that,
57			# if modified, will trigger a complete recompilation of the project.
58			COMMONDEPS = makefile
59
60			# The file include.mk contains the inclusion of all the sub-makefiles (subdir.mk)
61			# in the project. Includes for new cuts must be added there and not below...
62			-include include.mk
63
64			#-------------------------------- Make body --------------------------------#
65			#
66			# Below the make commands are defined. There are no options to set in this section,
67			# so it has to be modified only in case of radical changes to the make procedure.
68
69			# Remove command for clean
70			RM := rm -rf
71
72			# Additional dependencies from headers of other software (PAMELA, ROOT)
73			ifneq ($(MAKECMDGOALS),clean)
74			ifneq ($(strip $(CPP_DEPS)),)
75			-include $(CPP_DEPS)
76			endif
77			endif
78
79			# All Target
80	pam-fi	1.4	all: libPamCut.so
81			@echo
82			@echo "** Compiler version and compilation host **"
83			@$(C++) --version \| grep GCC
84			@hostname
85			@echo
86
87	pam-fi	1.1	# Tool invocations
88			libPamCut.so: $(OBJS) $(USER_OBJS)
89			@echo 'Building target: $@'
90			@echo 'Invoking: GCC C++ Linker'
91	pam-fi	1.7	$(C++) -shared $(LINKERFLAGS) -o"libPamCut.so" $(OBJS)
92	pam-fi	1.1	@echo 'Finished building target: $@'
93			@echo ' '
94
95			# Other Targets
96			clean:
97			-$(RM) $(CPP_DEPS) $(OBJS) libPamCut.so
98			-@echo ' '
99
100	pam-fi	1.3	distclean:
101			@rm -f ${PAM_LIB}/libPamCut.so
102			@rm -rf ${PAM_INC}/PamCut
103			@echo Installed files successfully removed.
104
105			install:
106			@if [[ "${PAM_INC}" == "" \|\| "${PAM_LIB}" == "" ]]; then \
107			echo Pamela environment not set. ; \
108			else \
109			rootdir=`pwd`; \
110			for file in `find -name "*.h"`; do \
111			dir=`dirname $${file} \| sed 's/.\///'`; \
112			mkdir -p ${PAM_INC}/PamCut/$${dir}; \
113			cp -u $${file} ${PAM_INC}/PamCut/$${dir}; \
114			done; \
115			cp -u libPamCut.so ${PAM_LIB}; \
116			fi
117			@echo PamCut installed.
118
119	pam-fi	1.4	.PHONY: all clean distclean install
120	pam-fi	1.3