Annotation of /PamCut/makefile

#
#   ************ PamCut makefile ************
#    
#     Author: Nicola Mori
#   
#               This makefile will produce a cut library libPamCut.so. In the "Build options"
#       section the various compilation options can be set; they will propagate to the
#       whole project.
#    


# ------------------------------- Build options ----------------------------#
#
# Normally you will not have the necessity to modify what lies below, if you
# correctly specified the names for the submakefiles in include.mk. Modify
# the options below to set optimization flags, compiler name and so on. 
#

# C++ compiler and linker
C++ = g++

# Optimization flags.
# 1) Use -O, -O1, -O2, -O3 to optimize for speed or -g, -g1, -g2, -g3
# for debugging (slower execution).
# 2) Uncomment -DDEBUGPAMCUT to enable debug sections in the .cpp code (these sections must be included between
# "#ifdef DEBUGPAMCUT" and "#endif"). Note that if you
# use debug instructions also in the .h code (headers) you will also have to add -DDEBUGPAMCUT
# to the compiler options for the main analysis program.
OPTIMIZE = -g3 #-DDEBUGPAMCUT


# Library flags
# Pamela software is modular, so some libraries may not be available in some istallations.
# To avoid linking problems, here you can define flags to exclude those parts of the
# PamCut software which make use of unavailable libraries. Remember to place
# the code to be excluded between proper preprocessor directives. See the documentation or the cut
# TofNucleiZCut for an example.

EXCLUSIONFLAGS = -DNO_CALONUCLEI -DNO_TRKNUCLEI #-DNO_TOFNUCLEI -DNO_CALONUCLEI -DNO_TRKNUCLEI

# Put below the files on which every .cpp  must depend on, ie., those files that,
# if modified, will trigger a complete recompilation of the project. 
COMMONDEPS = makefile

# The file include.mk contains the inclusion of all the sub-makefiles (subdir.mk)
# in the project. Includes for new cuts must be added there and not below... 
-include include.mk

#-------------------------------- Make body --------------------------------#
#
# Below the make commands are defined. There are no options to set in this section,
# so it has to be modified only in case of radical changes to the make procedure.

# Remove command for clean
RM := rm -rf

# Additional dependencies from headers of other software (PAMELA, ROOT)
ifneq ($(MAKECMDGOALS),clean)
ifneq ($(strip $(CPP_DEPS)),)
-include $(CPP_DEPS)
endif
endif

# All Target
all: libPamCut.so
        @echo
        @echo "**** Compiler version and compilation host ****"
        @$(C++) --version | grep GCC
        @hostname
        @echo
        
# Tool invocations
libPamCut.so: $(OBJS) $(USER_OBJS)
        @echo 'Building target: $@'
        @echo 'Invoking: GCC C++ Linker'
        $(C++) -shared -o"libPamCut.so" $(OBJS)
        @echo 'Finished building target: $@'
        @echo ' '

# Other Targets
clean:
        -$(RM) $(CPP_DEPS) $(OBJS) libPamCut.so
        -@echo ' '

distclean:
        @rm -f ${PAM_LIB}/libPamCut.so
        @rm -rf ${PAM_INC}/PamCut
        @echo Installed files successfully removed. 
        
install:
        @if [[ "${PAM_INC}" == ""  || "${PAM_LIB}" == "" ]]; then \
            echo Pamela environment not set. ; \
        else \
          rootdir=`pwd`; \
          for file in `find -name "*.h"`; do \
                dir=`dirname $${file} | sed 's/.\///'`; \
                mkdir -p ${PAM_INC}/PamCut/$${dir}; \
            cp -u $${file} ${PAM_INC}/PamCut/$${dir}; \
          done; \
          cp -u libPamCut.so ${PAM_LIB}; \
        fi
        @echo PamCut installed.

.PHONY: all clean distclean install

1	pam-fi	1.1	#
2			# ********** PamCut makefile **********
3			#
4			# Author: Nicola Mori
5			#
6			# This makefile will produce a cut library libPamCut.so. In the "Build options"
7			# section the various compilation options can be set; they will propagate to the
8			# whole project.
9			#
10
11
12			# ------------------------------- Build options ----------------------------#
13			#
14			# Normally you will not have the necessity to modify what lies below, if you
15			# correctly specified the names for the submakefiles in include.mk. Modify
16			# the options below to set optimization flags, compiler name and so on.
17			#
18
19			# C++ compiler and linker
20			C++ = g++
21
22			# Optimization flags.
23			# 1) Use -O, -O1, -O2, -O3 to optimize for speed or -g, -g1, -g2, -g3
24			# for debugging (slower execution).
25			# 2) Uncomment -DDEBUGPAMCUT to enable debug sections in the .cpp code (these sections must be included between
26			# "#ifdef DEBUGPAMCUT" and "#endif"). Note that if you
27			# use debug instructions also in the .h code (headers) you will also have to add -DDEBUGPAMCUT
28			# to the compiler options for the main analysis program.
29			OPTIMIZE = -g3 #-DDEBUGPAMCUT
30
31	pam-fi	1.4
32	pam-fi	1.1	# Library flags
33			# Pamela software is modular, so some libraries may not be available in some istallations.
34			# To avoid linking problems, here you can define flags to exclude those parts of the
35			# PamCut software which make use of unavailable libraries. Remember to place
36			# the code to be excluded between proper preprocessor directives. See the documentation or the cut
37			# TofNucleiZCut for an example.
38
39	pam-fi	1.5	EXCLUSIONFLAGS = -DNO_CALONUCLEI -DNO_TRKNUCLEI #-DNO_TOFNUCLEI -DNO_CALONUCLEI -DNO_TRKNUCLEI
40	pam-fi	1.1
41			# Put below the files on which every .cpp must depend on, ie., those files that,
42			# if modified, will trigger a complete recompilation of the project.
43			COMMONDEPS = makefile
44
45			# The file include.mk contains the inclusion of all the sub-makefiles (subdir.mk)
46			# in the project. Includes for new cuts must be added there and not below...
47			-include include.mk
48
49			#-------------------------------- Make body --------------------------------#
50			#
51			# Below the make commands are defined. There are no options to set in this section,
52			# so it has to be modified only in case of radical changes to the make procedure.
53
54			# Remove command for clean
55			RM := rm -rf
56
57			# Additional dependencies from headers of other software (PAMELA, ROOT)
58			ifneq ($(MAKECMDGOALS),clean)
59			ifneq ($(strip $(CPP_DEPS)),)
60			-include $(CPP_DEPS)
61			endif
62			endif
63
64			# All Target
65	pam-fi	1.4	all: libPamCut.so
66			@echo
67			@echo "** Compiler version and compilation host **"
68			@$(C++) --version \| grep GCC
69			@hostname
70			@echo
71
72	pam-fi	1.1	# Tool invocations
73			libPamCut.so: $(OBJS) $(USER_OBJS)
74			@echo 'Building target: $@'
75			@echo 'Invoking: GCC C++ Linker'
76			$(C++) -shared -o"libPamCut.so" $(OBJS)
77			@echo 'Finished building target: $@'
78			@echo ' '
79
80			# Other Targets
81			clean:
82			-$(RM) $(CPP_DEPS) $(OBJS) libPamCut.so
83			-@echo ' '
84
85	pam-fi	1.3	distclean:
86			@rm -f ${PAM_LIB}/libPamCut.so
87			@rm -rf ${PAM_INC}/PamCut
88			@echo Installed files successfully removed.
89
90			install:
91			@if [[ "${PAM_INC}" == "" \|\| "${PAM_LIB}" == "" ]]; then \
92			echo Pamela environment not set. ; \
93			else \
94			rootdir=`pwd`; \
95			for file in `find -name "*.h"`; do \
96			dir=`dirname $${file} \| sed 's/.\///'`; \
97			mkdir -p ${PAM_INC}/PamCut/$${dir}; \
98			cp -u $${file} ${PAM_INC}/PamCut/$${dir}; \
99			done; \
100			cp -u libPamCut.so ${PAM_LIB}; \
101			fi
102			@echo PamCut installed.
103
104	pam-fi	1.4	.PHONY: all clean distclean install
105	pam-fi	1.3