CollectionActions/RefitTrackAction/RefitTrackAction.h

/*
 * RefitTrackAction.h
 *
 *  Created on: 10/may/2010
 *      Author: N. Mori
 */

#ifndef REFITTRACKACTION_H_
#define REFITTRACKACTION_H_

#include "../CollectionAction/CollectionAction.h"
#include <TRandom3.h>

/*! @brief Track refitting.
 *
 * This action refits the TRK track using only level 2 data. This means that it will use the same
 * clusters which are associated to the track, with the possibility to mask or shift some of them.
 * If a refit fails the event will not be discarded (since this is not a cut) but chi2 will be negative,
 * and the event will be subsequently discarded by an eventual TrkPhSinCut.
 * This action can be used also before TrkPhSinCut, since it checks for the existence of at least
 * one track before refitting. The refitted track is always the first "physical" track; the ordering
 * criterion can be set using #SetSortingMethod(). If, instead, this action is placed after a TrkPhsinCut
 * it is not necessary to set this parameter, since the value used for TrkPhSinCut will be automatically
 * used (of course, it can be used as well if a different ordering may be needed).
 * Before fitting, the track parameters (measured impact positions and "good" flags) are reset to the
 * original values. This means that if two or more RefitTrackAction objects are used, each of them will
 * try to refit the original track of the current event (applying its own mask and spreads), regardless of
 * what was obtained with previous refits.
 * For a complete reprocess and fit use #ReprocessTrackAction.
 */
class RefitTrackAction: public CollectionAction {
public:

  /*! @brief Constructor
   *
   * @param actionName The action's name.
   * @param spreadX The width of the gaussian spread applied to all the X view coordinates, in cm.
   * @param spreadY The width of the gaussian spread applied to all the Y view coordinates, in cm.
   * @param maskedViews The excluded views. 0 means that all the views will be used, while #T6X means that the
   *                    X view of the last tracker plane will be ignored. For other combinations, sum up the values
   *                    defined in #TRKLAYERS: T1X + T1Y will exclude the whole first plane, for example.
   * @param trkParamsFile The file containing the tracker alignment parameters to be used. Default value corresponds to
   *                      the values contained in the official software calibration directory.
   */
  RefitTrackAction(const char *actionName, float spreadX = 0., float spreadY = 0., int maskedViews = 0,
      TString trkParamsFile = "") :
    CollectionAction(actionName), _spreadX(spreadX), _spreadY(spreadY), _maskedViews(maskedViews), _trkParamsFile(
        trkParamsFile), _sortingMethod(NULL) {

  }

  /*! @brief Destructor. */
  ~RefitTrackAction() {
  }

  /* @brief The refitting procedure.
   *
   * This will refit the tracker track introducing the mask and spreads defined in the constructor.
   *
   * @param  event The event to analyze.
   */
  void OnGood(PamLevel2 *event);

  /*! @brief The finalization procedure. */
  void Finalize() {

  }

  /*! @brief Sets the track sorting criterion.
   *
   * The action refits the first track, which is the one obtained with PamLevel2::GetTrack(0). This method can
   * be used to set the sorting criterion used to determine which track is the first.
   *
   * @param sortingMethod The sorting method. Format has to be compatible with the argument of PamLevel2::SetSortingMethod.
   */
  void SetSortingMethod(const char *sortingMethod) {
    _sortingMethod = sortingMethod;
  }

private:

  float _spreadX, _spreadY;
  int _maskedViews;

  static TRandom3 *_r3;
  static long int _currEvent;

  static float _xmBackup[], _ymBackup[];
  static int _layerXBackup[], _layerYBackup[];

  TString _trkParamsFile;
  static TString _currTrkParamsFile;

  const char *_sortingMethod;
};

#endif /* REFITTRACKACTION_H_ */
1	pam-fi	1.2	/*
2			* RefitTrackAction.h
3			*
4			* Created on: 10/may/2010
5			* Author: N. Mori
6			*/
7
8			#ifndef REFITTRACKACTION_H_
9			#define REFITTRACKACTION_H_
10
11			#include "../CollectionAction/CollectionAction.h"
12			#include <TRandom3.h>
13
14			/*! @brief Track refitting.
15			*
16			* This action refits the TRK track using only level 2 data. This means that it will use the same
17			* clusters which are associated to the track, with the possibility to mask or shift some of them.
18			* If a refit fails the event will not be discarded (since this is not a cut) but chi2 will be negative,
19			* and the event will be subsequently discarded by an eventual TrkPhSinCut.
20			* This action can be used also before TrkPhSinCut, since it checks for the existence of at least
21			* one track before refitting. The refitted track is always the first "physical" track; the ordering
22			* criterion can be set using #SetSortingMethod(). If, instead, this action is placed after a TrkPhsinCut
23			* it is not necessary to set this parameter, since the value used for TrkPhSinCut will be automatically
24			* used (of course, it can be used as well if a different ordering may be needed).
25			* Before fitting, the track parameters (measured impact positions and "good" flags) are reset to the
26			* original values. This means that if two or more RefitTrackAction objects are used, each of them will
27			* try to refit the original track of the current event (applying its own mask and spreads), regardless of
28			* what was obtained with previous refits.
29			* For a complete reprocess and fit use #ReprocessTrackAction.
30			*/
31			class RefitTrackAction: public CollectionAction {
32			public:
33
34			/*! @brief Constructor
35			*
36			* @param actionName The action's name.
37			* @param spreadX The width of the gaussian spread applied to all the X view coordinates, in cm.
38			* @param spreadY The width of the gaussian spread applied to all the Y view coordinates, in cm.
39			* @param maskedViews The excluded views. 0 means that all the views will be used, while #T6X means that the
40			* X view of the last tracker plane will be ignored. For other combinations, sum up the values
41			* defined in #TRKLAYERS: T1X + T1Y will exclude the whole first plane, for example.
42			* @param trkParamsFile The file containing the tracker alignment parameters to be used. Default value corresponds to
43			* the values contained in the official software calibration directory.
44			*/
45			RefitTrackAction(const char *actionName, float spreadX = 0., float spreadY = 0., int maskedViews = 0,
46			TString trkParamsFile = "") :
47			CollectionAction(actionName), _spreadX(spreadX), _spreadY(spreadY), _maskedViews(maskedViews), _trkParamsFile(
48			trkParamsFile), _sortingMethod(NULL) {
49
50			}
51
52			/! @brief Destructor. /
53			~RefitTrackAction() {
54			}
55
56			/* @brief The refitting procedure.
57			*
58			* This will refit the tracker track introducing the mask and spreads defined in the constructor.
59			*
60			* @param event The event to analyze.
61			*/
62			void OnGood(PamLevel2 *event);
63
64			/! @brief The finalization procedure. /
65			void Finalize() {
66
67			}
68
69			/*! @brief Sets the track sorting criterion.
70			*
71			* The action refits the first track, which is the one obtained with PamLevel2::GetTrack(0). This method can
72			* be used to set the sorting criterion used to determine which track is the first.
73			*
74			* @param sortingMethod The sorting method. Format has to be compatible with the argument of PamLevel2::SetSortingMethod.
75			*/
76			void SetSortingMethod(const char *sortingMethod) {
77			_sortingMethod = sortingMethod;
78			}
79
80			private:
81
82			float _spreadX, _spreadY;
83			int _maskedViews;
84
85			static TRandom3 *_r3;
86			static long int _currEvent;
87
88			static float _xmBackup[], _ymBackup[];
89			static int _layerXBackup[], _layerYBackup[];
90
91			TString _trkParamsFile;
92			static TString _currTrkParamsFile;
93
94			const char *_sortingMethod;
95			};
96
97			#endif /* REFITTRACKACTION_H_ */