--- DarthVader/TrackerLevel2/inc/F77/common_momanhough.f	2006/11/21 14:00:40	1.7
+++ DarthVader/TrackerLevel2/inc/F77/common_momanhough.f	2006/11/21 17:13:52	1.8
@@ -350,25 +350,45 @@
 *     distances in parameter space
 *     -----------------------------------------------------
       parameter (Dalfaxz3=1.)
-      parameter (Dalfayz1=0.8864e-1) 
-      parameter (Dalfayz2=0.6204e-3) 
-      parameter (Dalfaxz1=0.2909e-1) 
-      parameter (Dalfaxz2=0.2759e-2) 
+
+*     --- David ground 
+c$$$      parameter (Dalfayz1=0.8864e-1) 
+c$$$      parameter (Dalfayz2=0.6204e-3) 
+c$$$      parameter (Dalfaxz1=0.2909e-1) 
+c$$$      parameter (Dalfaxz2=0.2759e-2) 
+*     --- David flight (preliminary)
+      parameter (Dalfayz1=0.64e-3) 
+      parameter (Dalfayz2=0.54e-3) 
+      parameter (Dalfaxz1=0.50e-3) 
+      parameter (Dalfaxz2=0.12e-3) 
+
+
 *     -----------------------------------------------------
 *     Cut on normalized distances in parameter space. 
 *     Doublets/triplets are recursively included in a cloud 
 *     if the distance from any of the points already included
 *     is less than this cut.
 *     -----------------------------------------------------
-      parameter(cutystart=0.3)   
-      parameter(cutystep=0.3)    
-      parameter(cutxstart=1.) 
-      parameter(cutxstep=1.)  
-      parameter(maxcuty=100.) 
-      parameter(maxcutx=150.) 
+*     --- David ground 
+c$$$      parameter(cutystart=0.3)   
+c$$$      parameter(cutystep=0.3)    
+c$$$      parameter(cutxstart=1.) 
+c$$$      parameter(cutxstep=1.)  
+c$$$      parameter(maxcuty=100.) 
+c$$$      parameter(maxcutx=150.) 
+c$$$      parameter(nstepx=50)     !inclusion-cut increasing steps
+c$$$      parameter(nstepy=50) 
+*     --- David flight (preliminary)
+      parameter(cutystart=7.)   
+      parameter(cutystep=5.)              
+      parameter(cutxstart=5.) 
+      parameter(cutxstep=2.)  
+      parameter(maxcuty=200.) 
+      parameter(maxcutx=150.)  
+      parameter(nstepx=5)       !inclusion-cut increasing steps
+      parameter(nstepy=5) 
+      
 
-      parameter(nstepx=50)     !inclusion-cut increasing steps
-      parameter(nstepy=50) 
 
       real cutdistyz            !y0 / tg theta_yz space   
       real cutdistxz            !x0 / tg theta_xz space